SERVICE MANUAL NUMBER 28
POWER STEERING
CAUTION
DO NOT lug pump at maximum pressure for more than 5 seconds, in next step, or
damage to Power Steering pump may occur.
8.
Push in then pull steering cable momentarily. Gauge reading should show an instant
increase in pressure when block is pushed in both directions.
9.
Push steering cable in, until booster cylinder piston rod is fully retracted. With piston rod
in this position, momentarily push steering cable in until maximum pressure reading
is obtained.
•
•
If pressure is above 1000 psi (6897 kPa), system pressure is good.
If pressure is below 1000 psi (6897 kPa), conduct “Pump Pressure Test,” see “Index.”
Pump Pressure Test
CAUTION
In performing the following test, DO NOT lug pump at maximum pressure for more
than 5 seconds or damage to Power Steering pump may occur.
1.
Install test gauge.
b
a
c
d
a - Pump Pressure Hose
b - Test Gauge Assembly
c - Gauge To Control Valve Hose
d - Control Valve
INDEX
90-863160
MAY 2000
Page 6A-17
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit