SERVICE MANUAL NUMBER 28
REMOVAL, INSTALLATION AND ADJUSTMENTS
13.
Place a large I.D. flat washer and bushing on each end of the anchor pin. Be sure to
install the bushings with the small diameter end facing outward.
b
a
c
c
22029
a - Anchor Pin
b - Large I.D. Washers
c - Bushings
14.
15.
16.
17.
Loosen the nuts which secure the trim cylinders to the forward anchor pins. Move the
cylinder pivot ends outward and place them over the aft anchor pin.
Place the bushings (with the smaller diameter end facing inward) and the small I.D. flat
washers onto each end of the anchor pin. Install locknuts.
Tighten the forward and aft anchor pin locknuts until the locknuts and washers contact
against anchor pin shoulder.
Attach the trim cylinder caps hand tight. If the caps will not catch the threads, recheck
the tightness of the anchor pin nuts.
c
e
a
d
b
22029
a - Trim Cylinder Pivot Ends
b - Bushing
c - Small I.D. Flat Washer
d - Locknut
e - Trim Cylinder Cap
INDEX
90-863160
MAY 2000
Page 2A-27
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit