MAINTENANCE
SERVICE MANUAL NUMBER 30
WARNING
When flushing, be certain the area around propeller is clear, and no one is standing
nearby. To avoid possible injury, remove propeller.
CAUTION
Do not run engine above 1500 rpm when flushing. Suction created by seawater pick-
up pump may collapse flushing hose, causing engine to overheat.
CAUTION
Watch temperature gauge on dash to ensure that engine does not overheat.
6.
Operate engine at idle speed in NEUTRAL for 10 minutes, or until discharge water is
clear. Stop engine.
7.
Shut off water tap. Remove water hose and adaptor from pump inlet and reconnect
water inlet hose. Be sure to tighten hose clamp securely.
IMPORTANT: If boat is in the water, do not open water inlet valve until engine is to be
restarted to prevent contaminated water from flowing back into engine. If boat is not
fitted with a valve, leave water inlet hose disconnected and plugged.
Transmission Fluid
Checking Fluid Level
IMPORTANT: It may be necessary to adjust oil levels depending on installation angle
and cooling systems (heat exchanger and fluid lines).
WARNING
Do not remove dipstick with engine running. Hot oil can cause burns.
CAUTION
Clean around the area of the dipstick before removing. Small particles of dirt can
cause damage to internal components and cause valves to stick.
IMPORTANT: DO NOT allow fluid level to drop below the bottom line.
IMPORTANT: DO NOT screw dipstick in.
72526
INDEX
Page 1B-18
90-863161 SEPTEMBER 2000
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 496 CID |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser 496 CID 8.1L Gasoline Marine Engines Service Manual Number 30 4.0 out of 4.0 based on 2 product reviews. How many openings for crankcaseventilation is there on
Merc 496 HO ?
Great down load . it was all there an more