ZF/HURTH TRANSMISSIONS
SERVICE MANUAL NUMBER 30
12.
After final engine and coupler alignment has been properly set (with boat in the water),
connect propeller shaft coupler-to-transmission output flange with bolts, lockwashers
and nuts. Torque to 50 lb-ft (68 Nm).
IMPORTANT: Be certain to torque trunnion clamping fasteners on engine mounts
(port and starboard) which were loosened during removal.
IMPORTANT: All coupler bolts must be SAE Grade 8 (Metric Grade 10.9) or better, with
a shoulder (grip length) long enough to pass through the face mating plane of cou-
plers.
13.
Install transmission fluid cooler and hoses. Torque hose fittings at cooler and transmis-
sion housing to 25 lb-ft (34 Nm).
14.
15.
16.
Refill transmission with specified fluid.
Connect negative battery cable. Tighten clamp securely.
Check for leaks and check fluid level after first engine start-up.
INDEX
Page 8B-12
90-863161 SEPTEMBER 2000
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 496 CID |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser 496 CID 8.1L Gasoline Marine Engines Service Manual Number 30 4.0 out of 4.0 based on 2 product reviews. How many openings for crankcaseventilation is there on
Merc 496 HO ?
Great down load . it was all there an more