SERVICE MANUAL NUMBER 26
MCM 3.0L (181 CID) - ALPHA DRIVE
7.
Connect MerCathode wires to MerCathode controller assembly as shown, if equipped.
Apply a thin coat of Quicksilver Liquid Neoprene to all connections.
c
a
b
d
22232
a - ORANGE Wire - From Electrode on Transom Assembly
b - RED/PURPLE Wire - Connect Other End to Positive(+) Battery Terminal
c - BLACK Wire - From Engine Harness
d - BROWN Wire - From Electrode on Transom Assembly
IMPORTANT: Adjust shift cables as outlined in appropriate Sterndrive Service
Manual.
8.
Refer to appropriate Sterndrive Service Manual. Install and adjust drive unit and remote
control shift cables, using hardware retained.
IMPORTANT: After fluid hose installation in the following, bleed power steering
system as outlined in SECTION 1B - “Maintenance” or refer to appropriate Sterndrive
Service Manual.
9.
Connect power steering fluid hoses to control valve (large fitting first) as shown.
CAUTION
Route hoses exactly as shown below. This will help avoid stress on the hose fittings
and will help avoid kinks in the hose.
IMPORTANT: Make hydraulic connections as quickly as possible to prevent fluid
leakage.
IMPORTANT: Be careful not to cross-thread or overtighten fittings.
10.
Torque fittings to 23 lb-ft (31 Nm).
a
73786
a - Power Steering Fluid Hose Fittings
INDEX
90-861329--1
MARCH 1999
Page 2A-17
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 181 CID |
Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(6 votes, average: 5 out of 5) Marine readers have rated Mercury MerCruiser GM 4 Cylinder 181 cid 3.0L Marine Engines Service Manual Number 26 5.0 out of 5.0 based on 6 product reviews.
Thanks for sharing this material. Helps a lot after suffering with bad mechanics. spend too much money and nothing very good
great manual, makes impossible jobs possible. without a manual you can not do the job, a must have.
Great resource. Excellent information provided.
Need help to install automate choke
Need help to instal automate choke