Mercury MerCruiser GM 4 Cylinder 181 cid 3.0L Marine Engines Service Manual Number 26

SERVICE MANUAL NUMBER 26
MAINTENANCE
Crankcase Oil
To  help obtain  optimum  engine performance  and  to provide  maximum  protection, we
strongly recommend the use of Quicksilver 4-Cycle 25W-40 Marine Engine Oil. This oil is
a special blend of 25-weight and 40-weight oils for marine engines. If not available, a good
grade, straight  weight, detergent automotive oil  of correct viscosity,  with an API  service
rating of SH,CF/CF-2 may be used.
In those areas where Quicksilver  4-Cycle 25W-40 Marine Engine Oil or a  recommended
straight  weight oil  is not  available,  a multi-viscosity  20W-40  or, as  a  second but  less
preferable choice, 20W-50, with API service ratings of SH,CF/CF-2 may be used.
IMPORTANT:  The   use   of  non-detergent   oils,  multi-viscosity   oils  (other   than
Quicksilver 25W-40 or a good quality 20W-40 or 20W-50), synthetic oils, low quality
oils or oils that contain solid additives are specifically not recommended.
The chart below is a guide to crankcase oil selection. The oil filter should always be changed
with the engine oil.
SAE 40W
SAE 30W
SAE 20W
° F
° C
50
10
AIR TEMPERATURE
° F
° C
32
0
75796
Overfilled Crankcase Oil
Overfilled crankcases (oil level being too high ) can cause a fluctuation or drop in oil pressure
and rocker arm “clatter” on MerCruiser engines. The over-full condition results in the engine
crankshaft splashing and agitating the oil, causing it to foam (become aerated). The aerated
oil causes the  hydraulic valve lifters to  “bleed down.” This, in  turn, results in rocker  arm
“clatter” and loss of engine performance, due to the valves not opening properly.
Care must be taken when checking engine oil level. Oil level must be maintained between
the ADD mark and the FULL mark on the dipstick. To ensure that you are not getting a “false
reading,” make sure the following steps are done before checking the oil level.
Boat “at rest” in the water, or
If boat is on a trailer, raise or lower bow until the boat is setting at the approximate angle
that it would be if setting “at rest” in the water.
Allow sufficient time for oil to drain into the crankcase if engine has just been run or oil
has just been added.
Index
90-861329--1
MARCH 1999
Page 1B-9
Product Specification
CategoriesMercury MerCruiser Manuals
Tags
Model Year1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 422 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(6 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM 4 Cylinder 181 cid 3.0L Marine Engines Service Manual Number 26 5.0 out of 5.0 based on 6 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury MerCruiser GM 4 Cylinder 181 cid 3.0L Marine Engines Service Manual Number 26 SKU UPC Model
MARIUZAN GONCALVES on Jun 09, 2018. Good

Thanks for sharing this material. Helps a lot after suffering with bad mechanics. spend too much money and nothing very good


jerry l clark on Jun 05, 2018.

great manual, makes impossible jobs possible. without a manual you can not do the job, a must have.


Terence Maulhardt on Apr 25, 2018.

Great resource. Excellent information provided.


Dean Masman on Apr 22, 2018. Need help to

Need help to install automate choke


Vinny on Sep 01, 2014. Tech

Need help to instal automate choke


Jeff on Mar 06, 2013.



Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website