SERVICE MANUAL NUMBER 26
181 CID (3.0L) 4 CYLINDER GM ENGINE
CYLINDER HONING
1.
2.
3.
Follow hone manufacturer’s recommendations for use of hone and cleaning and lubrica-
tion during honing.
Occasionally, during the honing operation, thoroughly clean cylinder bore and check
piston for correct fit in cylinder.
When finish-honing a cylinder bore to fit a piston, move hone up and down at a sufficient
speed to obtain very fine uniform surface finish marks in a crosshatch pattern of approxi-
mately 30 degrees to cylinder bore. Finish marks should be clean but not sharp, free
from imbedded particles and torn or folded metal.
4.
Permanently mark piston (for cylinder to which it has been fitted) and proceed to hone
cylinders and fit remaining pistons.
IMPORTANT: Handle pistons with care and do not attempt to force them through cyl-
inder until cylinder is honed to correct size, as this type piston can be distorted by
careless handling.
5.
Thoroughly clean cylinder bores with hot water and detergent. Scrub well with a stiff
bristle brush and rinse thoroughly with hot water. It is extremely essential that a good
cleaning operation be performed. If any abrasive material remains in cylinder bores, it
will rapidly wear new rings and cylinder bores in addition to bearings lubricated by the
contaminated oil. Swab bores several times with light engine oil on a clean cloth, then
wipe with a clean dry cloth. Cylinder should not be cleaned with kerosene or gasoline.
Clean remainder of cylinder block to remove excess material spread during honing
operation.
Index
90-861329--1
MARCH 1999
Page 3A-67
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 181 CID |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM 4 Cylinder 181 cid 3.0L Marine Engines Service Manual Number 26 5.0 out of 5.0 based on 6 product reviews. Thanks for sharing this material. Helps a lot after suffering with bad mechanics. spend too much money and nothing very good
great manual, makes impossible jobs possible. without a manual you can not do the job, a must have.
Great resource. Excellent information provided.
Need help to install automate choke
Need help to instal automate choke