2011 Four Winns F-Series Boat Owners Manual

NOTICE
NOTICE
DO NOT  use a  bent or  damaged tongue  or
coupler.   Replacement parts may be  ordered
through a Four Winns dealer.
When extending tongue ensure that the brake
line and wire harness are not pinched. Failure
to check could result in damage.
The trailer tongue is hinged or removable on our painted
trailers and galvanized trailers.  This allows for easier
storage.  The tongue is attached with clevis pin(s) with
locking hair pin(s) or clevis pin keeper(s) to the trailer
frame.  Refer to Figure S3.
2.   Insert clevis pin. Always be sure to insert clevis
pin from the top and insert the clevis pin keeper.
NOTICE
The tongue  will exert  some pressure  on the
clevis pins. It may be necessary to lift, push or
wiggle the tongue to insert the clevis pins.
Make sure the trailer tongue is secure before
hitching to the towing vehicle.
4.
If towing the  trailer, remember to  plug the 5-
wire tongue  harness  to the  trunk connector
wire harness of your tow vehicle.
C.   Swivel Jack
Thejackisdesignedtolift,lowerandsupportthetongues
of the trailers when not connected to the towing vehicle.
Before unhitching the trailer, use the following guidelines
when setting up the jack.
Figure S3:  Trailer Tongue Assembly
To pivot  the tongue on  trailers models  with exposed
hinges:
1.
Pull on the lock pin.  See Figure S4.
1.
Make sure the  trailer jack is supporting  the trailer
load properly.   Refer  to Section  S-2C on  Swivel
Jacks for additional information.
2.
3.
Disconnect the trailer from the tow vehicle.
Unplug  the trailer’s   wire harness  from  the  tow
vehicle’s trunk connector.
Lock Pin
4.
Remove the clevis pin keeper and clevis pin.
NOTICE
The tongue  will exert  some pressure  on the
clevis pins. It may be necessary to lift, push or
wiggle the tongue to remove the clevis pins.
Figure S4:  Swivel Jack
5.
Pivot the tongue towards the trailer as far as it will
go.
2.
3.
Swivel jack to the vertical position.
To reinstall, follow this procedure in reverse order.
Release the  lock pin and  make sure the  pin fully
engages the attached tongue bracket.
1.
Pivot the tongue until the clevis pin holes
aligned.
Trailer Information - Section S
Owner’s Manual Page 119
Product Specification
CategoriesFour Winns F-Series Manuals, Four Winns Manuals
Tags
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 162 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandBoats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx
Document File TypePDF
Publisherfourwinns.com
Wikipedia's PageOutboard Marine Corporation
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website