MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
Routine inspection and maintenance is necessary to prolong outboard life. The following chart provides guidelines for
inspection and maintenance to be performed by an authorized Dealer.
IMPORTANT: Outboards used in rental, commercial, or other high hour applications require more frequent inspections
and maintenance. Adjust schedule for operating and environmental conditions.
Engine
Care
Product
Every 300
Hours or
(1)
Description
Three Years
Electrical and ignition wires, inspect for wear or chafing
Engine to transom mounting hardware, re-torque (54 N•m (40 ft. lbs.))
Fasteners, inspect any loosened components
Fuel and oil system components, inspect and repair leaks (2)
Fuel filter, replace
Gearcase lubricant, replace
A
C
B
C
Grease fittings, lubricate (3)
Power trim/tilt system and fluid level, inspect
Propeller shaft splines, inspect and lubricate (3)
Spark plugs, inspect and replace if necessary (2)
Starter pinion shaft, inspect and lubricate
D
C
Steering system, inspect and lubricate
Thermostats, inspect (2)
Throttle cable, inspect and re-tension
Water pump, inspect or replace if necessary
(1)
(2)
Average recreational use. Commercial use, heavy use, or use in salt or polluted water requires more frequent
inspection and maintenance (annual checks are recommended).
Emission-related component – Refer to Owner Responsibility on page 34, PRODUCT WARRANTY
INFORMATION on page 50 and, if applicable, CALIFORNIA EMISSION CONTROL WARRANTY
STATEMENT on page 53
(3)
Annually in salt water applications – Refer to Salt Water Lubrication Points on page 27
A.
HPF XR Gearcase Lubricant
HPF Pro Gearcase Lubricant in high performance or commercial applications
Power Trim/Tilt and Power Steering Fluid
Triple-Guard Grease
B.
C.
D.
Starter Bendix Lube ONLY, P/N 337016
35
Categories | Evinrude E-TEC Manual, Evinrude Outboard Manual |
---|---|
Tags | Evinrude 115 hp, Evinrude 130 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude BX, Evinrude CX, Evinrude HL, Evinrude HX, Evinrude MX, Evinrude PL, Evinrude PX, Evinrude SL |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1) Marine readers have rated 2010 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX Outboard Owners Manual 1.0 out of 1.0 based on 1 product reviews.
OWNER OF A 2010 E-TEC 130 HP ON A WELD-CRAFT 18 FT BASS BOAT. A TOTAL WASTE OF GOOD MONEY. E-TEC IS THE WORST MOTOR ON THE MARKET. MINE OVERHEATS AND HAS LEFT ME STRANDED MANY TIMES. MAKE SURE YOU HAVE A GOOD TOW LINE IF YOU DECIDE TO BUY ONE.