USING YOUR EVINRUDE E-TEC OUTBOARD
1)
Turn the manual release screw counterclockwise, slow-
ly (about 3 1/2 turns), until it lightly contacts its retain-
ing ring.
IMPORTANT: Impact damage is NOT covered by the out-
board warranty.
The outboard’s shock absorption system does not work
while operating in reverse. If you back into an object, either
in the water or while trailering, your boat and outboard can
be seriously damaged.
2)
3)
Reposition the outboard.
Tighten the manual release screw to hold the outboard
in its new position.
4)
Thrust rod is normally in the lowest position, position 1.
1
2
1.
2.
Manual release screw
Thrust rod
If you hit any object:
IMPACT DAMAGE
• STOP immediately and examine the outboard for loos-
ening of attaching hardware.
•
INSPECT for damage to swivel and stern brackets, and
Your outboard has a shock absorption system designed to
help withstand damage from impact with underwater ob-
jects at low to moderate speeds. High speed impacts with
rigid underwater objects like pilings or boulders can be be-
yond the capability of the absorption system. Such impacts
can result in serious damage to your outboard and injury to
boat occupants from the outboard or its parts entering the
boat. Occupants can also be ejected or injured by falling
against portions of the boat as a result of rapid deceleration
following impacts.
steering components.
•
•
EXAMINE the boat for structural damage.
TIGHTEN any loosened hardware.
If the collision occurred in the water, proceed slowly to har-
bor. Before boating again, have your Dealer thoroughly in-
spect all components.
WARNING
When boating in unfamiliar, shallow, or debris-laden wa-
ters, seek information on safe boating areas and naviga-
tion hazards from a reliable local source. Reduce your
speed and keep a sharp lookout!
Failure to inspect for damage after an accident or
striking an object could result in sudden, unex-
pected component failure, loss of boat control,
and personal injury. Unrepaired damage could
reduce your boat and outboard’s ability to resist
future impacts.
26
| Categories | Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 115 hp, Evinrude 130 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude BX, Evinrude CX, Evinrude HL, Evinrude HX, Evinrude MX, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Marine readers have rated 2010 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX Outboard Owners Manual 1.0 out of 1.0 based on 1 product reviews. OWNER OF A 2010 E-TEC 130 HP ON A WELD-CRAFT 18 FT BASS BOAT. A TOTAL WASTE OF GOOD MONEY. E-TEC IS THE WORST MOTOR ON THE MARKET. MINE OVERHEATS AND HAS LEFT ME STRANDED MANY TIMES. MAKE SURE YOU HAVE A GOOD TOW LINE IF YOU DECIDE TO BUY ONE.