FINE FILTER
MD11C and D
MD17C and D
Type .................................................................................
Earlier type ......................................................................
Spin-on
Filter insert
FEED PUMP
Feed pressure at 42 r/s (2520 r/min) ..............................
65-85 kPa (0.65-0.85 kp/cm
2
) (9.25-12.1 p.s.i.)
ELECTRICAL SYSTEM
Battery voltage ................................................................
Battery capacity, pleasure use (starter motor battery) ..
HD variant (starter motor battery) ...................................
Starter motor output
12 V
max 70 Ah
max 90 Ah
max 90 Ah
max 90 Ah
pleasure use ................................................................
HD variant ....................................................................
Alternator
1.1 kW (1.47 hp)
1.9 kW (2.55 hp)
1.9 kW (2.55 hp)
1.9 kW (2.55 hp)
Output MD11C, MD17C ..................................................
MD11D, MD17D, ................................................
Battery electrolyte, specific gravity:
35 A (490 W)
50 A (700 W)
Fully charged battery ...................................................
Battery to be recharged at...........................................
1.275-1.285 g/cm
3
(0.0460-0.0464 lb/in )
3
(0.0444 lb/in )
3
1.230 g/cm
3
COOLING SYSTEM
Thermostat, type .............................................................
WAX from and including engine no ............
Begins to open at.........................................................
Fully open at ................................................................
HDHE engine
Bellows (Replaceable with wax type)
49685
15740
60°C (140°F)
74°C (165°F)
Begins to open at.........................................................
Fully open at ................................................................
74°C (165°F)
89°C (192°F)
WEAR TOLERANCES
Cylinder liners and pistons should be replaced when
0.25
mm (0.010") wear can be measured.
Crankshaft
Permissible out-of-round on main and big-end
bearing journals, max ......................................................
Permissible taper on main and big-end
0.06 mm (0.00236")
bearing journals, max ......................................................
Max crankshaft end play.................................................
0.05 mm (0.00197")
0.45 mm (0.01772")
Valves
Valve stem, max permissible wear.................................
Max. clearance between valve stem and valve guides:
Inlet valves ......................................................................
Exhaust valves ................................................................
The valve disc edge shall be at least .............................
Distance from valve disc (new valve) to the cylinder
head face, max................................................................
0.02 mm (0.00079")
0.15 mm (0.00591")
0.17 mm (0.00669")
1.5 mm (0.059")
2.5 mm (0.09843")
Camshaft
Maximum permissible wear in bearing journals
and bearings ....................................................................
0.05 mm (0.0020")
42
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD11C, Volvo Penta MD11D, Volvo Penta MD17C, Volvo Penta MD17D |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Marine readers have rated Volvo Penta MD11C D MD 17C D Workshop Manual 4.0 out of 5.0 based on 2 product reviews. I realy need it!!!