Volvo Penta MD11C D MD 17C D Workshop Manual

VALVE SEATS  AND VALVES
ROCKER ARM  MECHANISM
33.
Dismantle the  rocker arm  mechanism and clean
the parts.  Check the shaft  and the bushes  for
wear. If the  bushes need to  be replaced, the tool
A =  max 2.5 mm  (0.10")
C =  45°
B =  1±0.1 mm  (0.040±0.004")     D = 44,5°
884560
is used for  pressing out and  in. (Ensure
that the  oil hole in  the bush coincides  with that
in the  rocker arm). After having  been pressed in,
the bushes should  be reamed to  give an accu-
rate running  fit. Check whether the  rocker arm
surface which  bears on the  valve is worn.  Minor
adjustments can  be made with  the valve grind-
ing machine.  Oil the shaft  and fit  the parts.
NOTE! Fit  the wear  caps on the  valve stems.
31.
Mill or  ream the valve seats,  the angle (C)
should be 45°.  Check the valve  guides and re-
place them  if necessary  before machining  the
seats, see  point 29. The  width (B) of  the sealing
surface should  be 1±0.1  mm (0.040"±0.004").
Grind the  valves in the  valve grinding  machine.
The angle  (D) should be  44.5°. If the  thickness
of the  edge of the disc  after grinding is  less than
1.5
mm (0.059"),  the valve should  be rejected.
Discard also  valves with bent  stems or  if the di-
mension (A)  exceeds 2.5  mm (0.10").  If neces-
sary grind  the surface on which  the rocker arm
bears. Grind  the valves in  using grinding com-
pound and  check the  surface contact using
marking blue.
VALVE SPRINGS
VALVE  TAPPETS
32.
Check the  valve spring lengths  both loaded and
unloaded.
Length unloaded ...................................... 50 mm  (1.969")
Length when loaded with
34.
Check the  valve tappets for  wear. The  cylindri-
L
L1
cal surface  should not be scored  or porous. The
surface bearing  on the camshaft  should not be
rough or worn  unevenly. Replace the  tappets if
necessary.
300±20
N (30±2 kp =  66.6±4.41 lbf) ....... 39 mm (1.535")
Length when loaded with
N (56±3 kp =  123.5±6.6 lbf) ......... 32 mm (1.26")
L2
560±30
16
Product Specification
CategoriesVolvo Penta Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 48 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(2 votes, average: 4 out of 5)
Marine readers have rated Volvo Penta MD11C D MD 17C D Workshop Manual 4.0 out of 5.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Volvo Penta MD11C D MD 17C D Workshop Manual SKU UPC Model
petar ognyanov on Jun 02, 2014.

I realy need it!!!


pauli tuovinen on Oct 31, 2012.



Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website