HAND STARTER, MD17
HAND STARTER, MD11
64.
Remove the cover (1) together with the drive
and shaft. Knock out the pin (2) and press the
shaft out. Remove the sealing ring (3).
Remove the cover (4) and the screws (9), take
off the gearwheel. Remove the bearing housing
(8),
(5).
the shaft, the bearings, the spacer sleeve and
the sealing rings.
Fit new sealing rings and replace any parts that
are worn or damaged. Pack the bearings in with
grease and refit the parts.
knock out the pin (6) and pull out the sleeve
Take out the locking screw (7) and press out
65.
Remove the oil filler pipe (2). Undo the screws
and take the gearwheel off. Knock out the lock-
ing pin (3) and take off the sleeve (4). Take out
the locking screw (1) and press out the shaft,
the bearings, the spacer sleeve and the sealing
rings.
Fit the new sealing rings and replace any parts
that are worn or damaged. Pack the bearings in
with grease and refit the parts.
23
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD11C, Volvo Penta MD11D, Volvo Penta MD17C, Volvo Penta MD17D |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Marine readers have rated Volvo Penta MD11C D MD 17C D Workshop Manual 4.0 out of 5.0 based on 2 product reviews. I realy need it!!!