Mercury-MerCruiser GM V6 262 CID 4.3L Marine Engines Service Manual Number 25 Sections 1-3

MAINTENANCE
SERVICE MANUAL NUMBER 25
Flushing System
If engine is operated in salty, polluted or mineral-laden water, flush seawater cooling system
(preferably after each use) to reduce corrosion and prevent  the accumulation of deposits
in the system. Thoroughly flush the seawater cooling system prior to storage.
NOTE: For additional  protection against freezing  and rust to the  exhaust manifolds and
other components, a 50-50 mixture of antifreeze and water can be run through the engine
during Power Package Layup.
1.
Install flushing attachment and water hose over the water pickup holes in gear housing.
a
b
72693
a  - Flushing Attachment
b  - Hose
WARNING
When flushing, be certain the area around propeller is clear, and no one is standing
nearby. To avoid possible injury, remove propeller.
CAUTION
Do not run engine above 1500 rpm when flushing. Suction created by seawater pick-
up pump may collapse flushing hose, causing engine to overheat.
CAUTION
Watch temperature gauge on dash to ensure that engine does not overheat.
2.
Open water tap enough to cool the engine, about½ of its maximum capacity. Adjust as
required so that the engine does not overheat.
3.
With drive in neutral gear, start engine and advance the throttle until the engine reaches
1300
rpm.
IMPORTANT: DO NOT run the engine at idle rpm.  Watch engine temperature gauge
on dash. Do not run the engine above 1500 rpm or engine overheating may occur.
4.
5.
Run engine for 10 minutes or until the discharge water is clear.
Slowly return the throttle to the idle position and turn engine off.
IMPORTANT: DO NOT rapidly advance or return throttle as this can cause water in-
gestion.
Index
Page 1B-18
90-861328--1   NOVEMBER 1999
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1998, 1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 225 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(4 votes, average: 4.5 out of 5)
Marine readers have rated Mercury-MerCruiser GM V6 262 CID 4.3L Marine Engines Service Manual Number 25 Sections 1-3 4.5 out of 5.0 based on 4 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury-MerCruiser GM V6 262 CID 4.3L Marine Engines Service Manual Number 25 Sections 1-3 SKU UPC Model
Steve tyler on Jul 03, 2018. This is great. I really like it. Thank you for providing this valuable opportunity for me.

This is great. I really like it. Thank you for providing this valuable opportunity for me.


stephen on May 10, 2016. 262 mercruiser

if I can get the info that would be great


Santiago Verdera ferrer on Nov 19, 2015. Manual mercruiser

The information given is enoug .


Bob on Nov 05, 2015. I require this manual so I can fix my boat. This site makes it easier for me. Thank you for the download.

In my opinion this is the best site on the net. Assisting people to do a job correctly and safely.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website