X TROUBLESHOOTING
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
Starter motor will not operate
• Shift handle not in NEUTRAL.
• Fuse blown.
Engine will not start
• Fuel system not primed after running out of fuel.
Refer to Operation on page 22.
•
Not following starting instructions. Refer to
Operation on page 22.
•
•
•
•
•
Fuel tank empty.
Fuel hose kinked.
Fuel system contaminated with water or dirt.
Fuel filter obstructed.
S.A.F.E. protection mode activated. Refer to
Engine Monitoring on page 41.
Spark plugs improperly gapped, carboned,
burned, or wet.
Spark plugs incorrect. Refer to Service Tips on
page 52.
•
•
•
Fuse blown.
Engine will not idle properly
Engine loses power
• Debris on propeller.
•
Spark plugs damaged or incorrect. Refer to
Service Tips on page 52.
•
Fuel system contaminated with water or dirt.
• S.A.F.E. protection mode activated. Refer to
Engine Monitoring on page 41.
•
Water intakes obstructed and cooling system not
operating correctly. Refer to Engine Overheating
on page 41.
•
Spark plugs damaged or incorrect. Refer to
Service Tips on page 52.
•
•
•
Fuel filter obstructed.
Fuel system contaminated with water or dirt.
Oiling system malfunction.
Engine runs, but makes little or
no progress
• Throttle needs to be reset, refer to Refer to
Operation on page 22.
•
•
•
•
Propeller hub loose, slipping.
Propeller blades bent or missing.
Propeller shaft bent.
Propeller debris.
Warning system activates
• Refer to Engine Overheating on page 41.
59
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 15 hp, Evinrude 25, Evinrude 30 hp, Evinrude DEL, Evinrude DHPL, Evinrude DHT, Evinrude DPL, Evinrude DR, Evinrude DRL, Evinrude DTE, Evinrude DTEL, Evinrude HTSL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)