X OPERATION
Connect the clip to the emergency stop
switch.
1
1
2
3
1.
Extra clip
007013
WARNING
1.
2.
3.
Clip
Emergency stop clip / switch
Lanyard
Avoid knocking or pulling the clip off
the stop switch during normal boat-
ing. The resulting unexpected loss
of forward motion can throw occu-
pants forward, causing injury.
WARNING
Always use the safety lanyard when
operating your boat to help prevent a
runaway boat and reduce the risk of
personal injury or death.
Keep the lanyard free from obstruc-
tions and entanglements.
At each outing, test the system’s
operation. With the engine running,
remove the clip from the switch by
pulling the lanyard. If the engine
does not stop running, see your
Dealer.
Snap the lanyard to a secure place on the op-
erator’s clothing or life vest — not where it
might tear away instead of activating the stop
switch.
NOTICE
Carefully check the function
of all control and engine systems before
leaving the dock. DO NOT shift the engine
into FORWARD or REVERSE while it is
shut off.
1
004850
1.
Lanyard
Disconnecting the clip and lanyard will stop
the engine and prevent the boat from becom-
ing a runaway if the driver moves beyond the
range of the lanyard. If the lanyard is too long,
it can be shortened by knotting or looping it.
DO NOT cut and retie the lanyard.
An extra clip is stored on the tiller handle. If
the operator is thrown from the boat, another
person can insert the extra clip in the stop
switch and start the outboard.
23
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 15 hp, Evinrude 25, Evinrude 30 hp, Evinrude DEL, Evinrude DHPL, Evinrude DHT, Evinrude DPL, Evinrude DR, Evinrude DRL, Evinrude DTE, Evinrude DTEL, Evinrude HTSL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)