Using Your Evinrude E-TEC
Move the shift lever to NEUTRAL. Refer to Starting – Tiller Rope Models
Shifting and Speed Control - Tiller Models
on page 26.
While seated, grasp the starter handle and
pull slowly until the starter engages, then pull
hard. Repeat, if needed, until outboard starts.
1
NOTICE
To prevent damage to starter
assembly, allow starter cord to rewind
before releasing starter handle.
1
1
007006
1.
NEUTRAL
WARNING
Always shift to NEUTRAL before
starting the outboard to prevent sud-
den boat movement, which can
cause injury.
007009
1.
2.
Starter handle
NEUTRAL
If your outboard does not react normally to
Twist throttle grip to SLOWEST speed posi- this starting procedure or if it fails to start, re-
tion.
fer to Troubleshooting on page 59.
Starting – Tiller Electric Models
While seated, press the start button. (If
equipped with a key switch, it must be in the
ON position.) Crank the engine no longer than
1
20
seconds.
007067
1.
SLOWEST speed position
1
DO NOT advance the throttle before start-up.
Advancing the throttle overrides the electron-
ic idle control system. If the outboard is start-
ed with the throttle advanced, the outboard
will be in a safety mode. It will not respond to
007010
1.
Start button
NOTICE
The starter motor can be dam-
throttle until the throttle twist grip is returned aged if operated continuously for more
to slowest speed position.
than 20 seconds.
Upon start-up, release the button.
24
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 15 hp, Evinrude 25, Evinrude 30 hp, Evinrude DEL, Evinrude DHPL, Evinrude DHT, Evinrude DPL, Evinrude DR, Evinrude DRL, Evinrude DTE, Evinrude DTEL, Evinrude HTSL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)