2011 Four Winns H-Series Boat Owners Manual

Control Systems
F - 1    GENERAL
F - 2    CONTROL OPERATION - GENERAL
A.   Carbureted Engines
Control systems permit operation of the engine’s throt-
tle and shift mechanisms. They consist of three major
components; the control, the throttle and shift cables.
The shift mechanism on the controls can be
disengaged to allow for easier starting and engine
warm-up. See Figure F-1. To disengage:
Your Four Winns  boat is equipped with a single lever,
®
side mount control. This allows you to select forward
or reverse gear, regulate engine speed, and ensure
shifting is done at low engine speed.
1.   Place control handle in neutral position (B).
2.
Press both neutral lock button (A) and shift
disengage button (C).
A “start-in-neutral-only” feature which prevents starting
in gear is included. Refer to F-3 Neutral Safety Switch
in this section.
3.   Move control handle forward to increase throttle.
Also, the side mount control has a neutral lock button
to prevent accidental shifting. It must be squeezed to
permit shifting from neutral to forward or reverse.
Built into the control is a trim control which you can
use to adjust the position of the outdrive. Pressing the
switch in the UP position moves the outdrive out and
away from the transom. Pressing the switch in the
DOWN position moves the outdrive in closer to the
transom. The switch returns to its center neutral
position when released. For additional information
see Section E-5.
Figure F-1:  Control Operation
Neutral is in the center or straight up position. Rotating
The neutral lock and shift mechanism will automat-
the control forward shifts the engine into forward. Rotat-    ically engage when the control handle is returned to
ing the control aft shifts the engine into reverse. Moving
the neutral position.
the lever further forward or aft increases engine speed.
4.
5.
6.
7.
Shift Mechanism Engaged (D).
Shift Mechanism Disengaged (E).
Reverse Shift Range (F).
NOTICE
When shifting, ensure engine speed is below
RPM to avoid damaging the shifting
800
mechanism.
Reverse Throttle Range (G).
NOTICE
Allow the engine to warm up before engaging
the shift control. Monitor all instruments while
engine is idling during warm-up.
8.   Forward Shift Range (H).
9.   Forward Throttle Range (I).
Refer to the engine manual, included in the owner’s
packet, for additional information on control operation.
Specific information on controls and their opera tion can
be found in the engine manufacturer’s manual included
in the owner’s packet.
Control Systems - Section F
Owner’s Manual Page 62
Product Specification
CategoriesFour Winns H-Series Manuals, Four Winns Manuals
Tags
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 179 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandBoats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx
Document File TypePDF
Publisherfourwinns.com
Wikipedia's PageOutboard Marine Corporation
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website