3.
Push opposite end of the jumpseat into the
recessed portion of the motorhood cover. The
fit should be snug and relatively flush with top
storage cushion. Generally, the sew pattern of the
jumpseat should match the top storage cushion.
Failure to lock the fishing chair pedestal in
place could result in injury. Be sure the
pedestal is securely locked into place.
To prevent personal injury, be sure the jump
seats are secure before use. Do not step or
walk on jumpseats. Jumpseats could move
and cause loss of balance.
DO NOT sit on the backrest portion of any
cockpit seat. The helmsman could lose control
of the boat or passengers could be thrown from
the boat. The seat could also be damaged if
excessive force is applied.
NOTICE
Do not operate the boat with jumpseats in their
upper positions. Loss of cushions may occur
due to cushions being blown overboard.
To avoid possibility of occupant being thrown
from boat, NEVER ALLOW ANYONE TO
OCCUPY AN ELEVATED FISHING CHAIR
WHEN THE BOAT IS UNDERWAY AT MORE
THAN TROLLING SPEED.
NOTICE
When traveling at highway speeds, be sure
the jumpseats are secure (locked in their down
positions). Do not tow your boat with the jump-
seats in their sundeck position. Air currents
(created within the interior when traveling) will
lift the cushions up and out of the boat under
certain conditions; especially when semi-trucks
or other large vehicles pass by.
Access to the engine lid may be gained by unsnap-
ping and removing the sundeck pad. Note: If Fish &
Ski seat is installed and you want to gain access to the
engine compartment, you will want to first remove the
Fish & Ski seat along with the pedestal. Removal of
the center stern seat cushion is also advisable when
accessing the engine or using the stern fishing chair
(less wear & tear). You can remove the center stern
seat cushion by undoing the snaps.
F. Stern Drive Fish & Ski Aft Seating
On our stern drive Fish & Ski models the twin stern
seats convert to pedestal fishing chairs. The fishing
chair locations are one in the bow platform area and
one in the stern platform area.
Depending on the Fish & Ski model, when the center
stern cushion is removed, a storage compartment or
an integrated cooler/livewell becomes accessible.
Simply remove the carpeted support board or release
the latch on the cooler/livewell lid to gain access. Note:
The carpeted support board or cooler/livewell lid must
be in the closed position prior to installing the center
stern seat cushion. See Figures N-9 and N-10.
To turn the stern seat into a fishing chair:
1. Place the fishing chair pedestal into the floor
mount. Be sure the latch locks into place.
2.
3.
Remove the stern seat by lifting the seat up
and out of the stern seat base.
Place the stem of the stern seat onto the pedestal.
To turn the fishing chair into a stern seat reverse
the procedure explained in the proceeding steps.
To remove the pedestal, push on the release button
and lift up.
Upholstery - Section N
Owner’s Manual Page 100
| Categories | Four Winns H-Series Manuals, Four Winns Manuals |
|---|---|
| Tags | Four Winns H |
| Model Year | 2011 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)