Volvo Penta MD5A Marine Diesel Engine Workshop Manual

Repair instructions
Dismantling
1.
externally  afterwards. Loosen  the water  hose  between the     pump  and the injector  and  unscrew the  rocker gear.  Note!
Drain the cooling water and the  oil from the engine. Clean    3.  Remove the  rocker cover  and the  fuel pipe  between  the
gearbox and the sea -water pump and remove the gearbox.
Pull  the rocker  gear  straight  up since  it  is  centred with  a
guide pin 1.  The other hole 2 is an oil channel.
2.
Remove  the generator  and its  drive  belt, starter  motor,     4.  Remove the  push-rods 1,  remove the  cylinder  head and
the cylinder head gasket. Take care  of the washers 2  under
the nuts.
fuel filter and fuel  pump with the  drain-off pipe (be careful of
fuel  spillage), coolant water pump with  hose and thermostat
housing,  dipstick,   temperature  and  oil  pressure   sensors.
Unscrew and discard the oil filter.
3
Product Specification
CategoriesVolvo Penta Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 38 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Marine readers have rated Volvo Penta MD5A Marine Diesel Engine Workshop Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Volvo Penta MD5A Marine Diesel Engine Workshop Manual SKU UPC Model
Terry Baldwin on Nov 11, 2014. Volvo Penta MD5A Marine Diesel Engine - Workshop Manual

Very useful download. Thanks VM.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website