21.
Remove the steel wire which holds the filter. Remove Overhauling the sea-water pump
and clean the wire gauze thoroughly. Afterwards remove the 23. The sea-water pump is a round flange type pump which
six screws which hold the cover in position. Discard the means that it can be fitted in a position best suited to the
gasket.
coolant water hoses. The new pump is fitted with an 0-ring
which forms a seal against the engine.
22.
Remove the gearwheel from the housing. Remove the 24. Remove the cover (6 screws). Change the impeller with
split pin for the reduction valve. Remove washer 1, spring 2 the help of two screwdrivers or something similar. Note!
and piston 3. Clean and replace damaged parts. Assemble Protect the edges of the pump housing. See the figure. Prise
the lubricating oil pump in the reverse order. Note! Fit a new out the impeller with the screwdrivers so far that the screw
gasket 4 between the housing and the cover. Fix the wire becomes visible.
mesh 5 in position with the steel wire 6 and finally lay the key
in position and tighten the gearwheel 7.
8
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD5A |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Volvo Penta MD5A Marine Diesel Engine Workshop Manual 5.0 out of 5.0 based on 1 product reviews. Very useful download. Thanks VM.