Electrical system
Dismantling of the starter motor
1.
2.
3.
Remove both battery leads.
Release the electric cables to the starter motor.
Dismantle the starter motor�s attachment screws
and lift off the starter motor.
Stripping of the starter motor
Fig. 117. Dismantling of the stator housing
1.
Clean the exterior of the starter motor.
5.
Remove the brush holder plate. Remove the stator
housing from the rotor and front bearing shield; on
2040
from the gear housing.
Fig. 115. Stripping of the starter motor
Remove the magnet.
Fig. 118. Dismantling of the rotor
6.
Remove the coupling arm and rotor.
2.
MD2040: The coupling arm is fitted in the gear
housing.
3.
Remove the protective cover from the rear bearing
shield. Remove the lock ring and where appropriate
the intermediate washer(s).
Fig. 119. Dismantling of the starter gear
7.
Remove the starter gear as per Fig. 119. First re-
move the lock ring by tapping down the contact ring
with a suitable mandrel.
MD2040: The starter gear is fitted in the gear hous-
ing.
Fig. 116. Dismantling of the bearing shield
Remove the rear bearing shield.
4.
77
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD2010, Volvo Penta MD2020, Volvo Penta MD2030, Volvo Penta MD2040 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Marine readers have rated Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual 4.3 out of 5.0 based on 4 product reviews. GOOD AND GOODER S=GOODEST. IS BESTER
jeg skal bruge manualen , til at samle min Volvo penta md 2030 igen.
Ö, hur dka jag veta om det är bra innan jag set produkten.
Pages 58 and 59 are missing from Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual. I need only these pages at present!