O
Always use protective glasses or goggles when
carrying out work where there is a risk of splin-
ters, grinding sparks, acid splashes or where
other chemicals are used. The eyes are ex-
tremely sensitive, an injury could result in blind-
ness!
Ensure that rags soaked in oil or fuel and used
fuel or oil filters are stored safely. Rags soaked
in oil can spontaneously ignite under certain cir-
cumstances. Used fuel and oil filters are envi-
ronmentally dangerous waste and must be de-
posited at an approved site for destruction
together with used lubricating oil, contaminated
fuel, paint remnants, solvent, degreasing agents
and waste from washing parts.
0
Avoid getting oil on the skin! Repeated expo-
sure to oil or exposure over a long period can
result in the skin becoming dry. Irritation, dry-
ness and eczema and other skin problems can
then occur. Used oil is more dangerous than
fresh oil from a health aspect. Use protective
gloves and avoid oil soaked clothes and shop
rags. Wash regularly, especially before eating.
There are special skin creams which counteract
drying out of the skin and make it easier to clean
off dirt after work is completed.
Never expose a battery to naked flame or elec-
trical sparks. Never smoke in proximity to the
batteries. The batteries give off hydrogen gas
during charging which when mixed with air can
form an explosive gas -
. This gas
is easily ignited and highly volatile. Incorrect
connection of the battery can cause a single
spark which is sufficient to cause an explosion
with resulting damage. Do not shift the connec-
tions when attempting to start the engine (spark
risk) and do not lean over any of the batteries.
Many chemicals used on the product (for ex-
ample engine and transmission oils, glycol,
gasoline and diesel oil), or chemicals used in
the workshop (for example degreasing agents,
paint and solvents) are dangerous to health.
Read the instructions on the product packaging
carefully! Always follow the safety precautions
for the product (for example use of protective
2L
0
Always ensure that the Plus (positive) and Mi-
nus (negative) battery leads are correctly in-
stalled on the corresponding terminal posts on
the batteries. Incorrect installation can result in
serious damage to the electrical equipment. Re-
fer to the wiring diagrams.
mask, glasses, gloves
.). Make sure that other
personnel are not exposed to hazardous chemi-
cals, for example in the air. Ensure good ventila-
tion in the work place. Follow the instructions
provided when disposing of used or leftover
chemicals.
Always use protective goggles when charging
and handling the batteries. Battery electrolyte
contains sulfuric acid which is highly corrosive.
Should the battery electrolyte come into contact
with unprotected skin wash off immediately us-
ing plenty of water and soap. If battery acid
comes in contact with the eyes, immediately
flush with plenty of water and obtain medical as-
sistance at once.
IL
0
extreme care when leak detecting on
the fuel system and testing the fuel injector jets.
Use eye protection. The jet from a fuel injector
nozzle is under extremely high pressure and
has great penetrative energy, so the fuel can
penetrate deep into the body tissue and cause
serious personal injury. Danger of blood poison-
ing.
A
Turn the engine off and turn off the power at the
main
) before carrying out work on the
electrical system.
All fuels and many chemical substances are
flammable. Do not allow naked flame or sparks
in the vicinity. Fuel, certain thinner products and
hydrogen from batteries can be extremely flam-
mable and explosive when mixed with air.
Smoking is not to be permitted in the vicinity!
Ensure that the work area is well ventilated and
take the necessary safety precautions before
starting welding or grinding work. Always en-
sure that there are fire extinguishers at hand
when work is being carried out.
Clutch adjustments must be carried out with the
engine stopped.
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD2010, Volvo Penta MD2020, Volvo Penta MD2030, Volvo Penta MD2040 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Marine readers have rated Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual 4.3 out of 5.0 based on 4 product reviews. GOOD AND GOODER S=GOODEST. IS BESTER
jeg skal bruge manualen , til at samle min Volvo penta md 2030 igen.
Ö, hur dka jag veta om det är bra innan jag set produkten.
Pages 58 and 59 are missing from Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual. I need only these pages at present!