Engine body
Fig. 59. Dismantling of circlip to cover for the oil pump
2
Fig. 57. Dismantling of injection pump
10.
Remove the circlip for the intermediate gear
(Fig. 59). Take care of the sleeve washer, spring
and shims.
1.
Lock pin
2. Shims
Lift off the gear complete with cover and oil pump.
7.
Release the injection pump. Turn the stop lever
clockwise and carefully lift up the pump so that the
lock pin to the regulator arm is accessible (Fig. 57).
11.
Dismantle the crankshaft gear with a universal ex-
tractor.
Remove the lock pin and release the regulator arm.
Lift off the injection pump.
12.
If the camshaft gear is to be dismantled the cam-
shaft must be removed complete. See under head-
ing "Dismantling of camshaft" on page 44.
NOTE! Take care off the shims under the injec-
tion pump flange.
Inspection of timing gears
8.
Dismantle the timing gear casing.
Fig. 60. Checking of gear flank clearance
2
Clean the gears and other parts of the timing gears and
check them carefully. Replace gears which are heavily
worn or damaged.
Fig. 58. Timing gears, basic setting
1.
2.
Crankshaftgear
Intermediate gear
3.
Check the flank clearance with a feeler gauge or a dial
gauge.
Max. permissible flank clearance: 0.25 mm (.0098 in).
Note: If the flank clearance exceeds the permissible
value all the the gears in the timing gears should be re-
placed.
9.
Pull round the engine until the markings on the tim-
ing gears correspond.
41
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD2010, Volvo Penta MD2020, Volvo Penta MD2030, Volvo Penta MD2040 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Marine readers have rated Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual 4.3 out of 5.0 based on 4 product reviews. GOOD AND GOODER S=GOODEST. IS BESTER
jeg skal bruge manualen , til at samle min Volvo penta md 2030 igen.
Ö, hur dka jag veta om det är bra innan jag set produkten.
Pages 58 and 59 are missing from Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual. I need only these pages at present!