Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual

Cooling system
Replacing the  circulation pump
Dismantling
1.
Drain off  the refrigerant  from the engine  (fresh  wa-
ter system).
2.
Release  the alternator  and remove  the drive belt.
MD2030,  MD2040: Remove  the clamp  for the  alter-
nator.
3.
4.
Remove  the rubber hoses  to and  from the pump.
Fig. 108.  Application   of sealing  compound  (silicon)
Release  the electric  cables to the  temperature  re-
lay.
3.
Apply sealing  compound  (silicon,  Volvo  Penta part
No. 1161277-7)  on the  cylinder block  as per Fig.
108,
shaded area.
Fit the refrigerant  pump  with a new  gasket.
4.
5.
MD2030,  MD2040: Fit  the clamp to  the alternator.
Fit the rubber  hoses  at the pump�s  inlet  and outlet.
Tighten the  hose clips.
6.
Fit the  drive belt.  It should be  possible  to press the
belt down  approx.  10 mm (.40  in) between  the pul-
leys.
Fig. 107.  MD2030. Circulation  pump
7.
8.
Connect  the contact  piece to the  temperature  relay.
5.
Remove  the pump�s   attachment  screws and  lift off
the pump.
Fill up with  refrigerant.  Start the engine  and check
that no leakage  occurs.
MD2030:  Remove the  back piece  (plate), spring,
and thermostat.
Fitting
Replacing the  pump wheel in the  sea
water pump
1.
Clean the  mating surfaces  on the  pump and cylin-
der block.
Close the  bottom cock,  or the cock  on the S-drive
before working  on the cooling  system.
2.
MD2030:  Place the thermostat  and  spring in the
pump. Fit  the back piece  (plate) on  the pump with  a
new gasket.
1.
Dismantle  the pump�s  end  cover and  drain off the
water in  the sea water  system.
66
Product Specification
CategoriesVolvo Penta Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 81 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(4 votes, average: 4.25 out of 5)
Marine readers have rated Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual 4.3 out of 5.0 based on 4 product reviews.
Submit your review (optional)
(will not be displayed)
12345
* Required Field
Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual SKU UPC Model
zljkn on Sep 15, 2018. YES

GOOD AND GOODER S=GOODEST. IS BESTER
Henning Hansen on Jul 16, 2018. Volvo penta md2030

jeg skal bruge manualen , til at samle min Volvo penta md 2030 igen.
X on Apr 28, 2018.

Ö, hur dka jag veta om det är bra innan jag set produkten.
rune on Oct 23, 2013.


One thought on “Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual”

  1. Pages 58 and 59 are missing from Volvo Penta MD2010 MD2020 MD2030 MD2040 Workshop Manual. I need only these pages at present!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website