™
V. Maintenance - Exhaust System Integrity
X. Maintenance - Bulkhead and Deck Integrity
Gas tight integrity of exhaust systems must be main- 1. Seal all visible openings (e.g., cracks, crevices,
tained to insure that leakage of CO within the boat does
not occur. Disassembly may be required to carry out a
thorough inspection. Repair or replace components
as indicated. Inspect the following:
holes, including openings around wiring and piping
runs) in bulkheads and decks that separate ma-
chinery compartments from occupied compart-
ments. These openings can permit migration of
CO vapors.
1.
Gaskets at cylinder head connection
. Casting and pipe fittings in the dry section
All joints
. Hoses
2.
Check gaskets and sealing surfaces on hatches,
doors, and access panels.
2
3
4
.
Y. Maintenance - Air Conditioning Systems
These systems can be a source of CO ingress and
migration of CO vapors.
5.
6.
Clamps
1.
2.
Keep grilles and filters clean.
Mufflers and their drain plugs
Seal bulkhead voids and openings at wiring and
piping runs in return air ducting, plenums, and air
handling equipment enclosures, especially those
adjacent to machinery compartment bulkheads.
7. Thru-hull fittings
8. Hangers and other supports
W. Maintenance - Ventilation Systems
3. Check that water traps and condensate drains are
present. These may be in the form of a double
loop in the drain line or prefabricated p-traps. Any
drain that discharges below the waterline when the
boat is underway is sealed, by virtue of its design,
against CO intrusion.
Boats are equipped with ventilation systems to elimi-
nate gasoline vapors. Blowers and fans may also be
provided for ventilation and to mitigate the migration of
CO into occupied compartments. Attention should be
paid to the following:
Z. Maintenance - Liquid Drains
1.
Keeping ventilation intakes clear of debris
Sink, shower and condensate drains can be a source
of CO ingress. Ensure that water traps are present
and contain fluid. These traps may be in the form of a
2
3
. Replacing damaged hardware
. Maintaining the integrity of the ducting material and double loop in the drain line or prefabricated p-traps.
its connections
Any drain that terminates below the waterline is, by vir-
tue of its design, sealed against CO intrusion. Some
drains that are below the waterline when boat is under-
4
. Ensuring that position of ducting intake is not ob-
structed or restricted, collapsed, kinked, or crushed way will be above the waterline when the boat is at
rest. The location of drains, relative to the waterline,
5. Eliminating sags in ducting that can form a water
trap
can be affected by the dynamics of boat motion (i.e.,
underway or at rest).
6. Checking hangers and other supports
7. Ensuring blower/fan is operational
8. Ensuring that airflow is present at discharge
9. Inspecting wiring to equipment
AA.CO Detection System
Four Winns has included two CO detectors as a stan-
dard feature. One of the CO detectors is located in the
forward V-berth and the other is located in the aft/mid
cabin. Check systems and maintain in accordance with
the manufacturer’s instructions.
Vista™ Owner’s Manual
Section B
Page 10
| Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Vista 248, Four Winns Vista 268, Four Winns Vista 288, Four Winns Vista 298, Four Winns Vista 328, Four Winns Vista 348 |
| Model Year | 2004, 2005, 2006, 2007, 2008 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.67 out of 5)
Marine readers have rated 2004-2008 Four Winns Vista 248 268 288 288 298 328 348 Boat Owners Manual 4.7 out of 5.0 based on 3 product reviews. i like this boat