™
™
G. Tie-downs
J. Bearings
Replace frayed or damaged tie-downs. Periodically, lu- Wheel bearings and seals should be inspected at the
bricate the ratchet mechanism with a fine oil or silicone same time as brakes. Have worn or defective parts re-
spray. ReplacementpartsmaybeorderedthroughaFour placed. Grease bearings and seals at this time and at
Winns dealer.
theendof theboatingseason. Bearing Protectors should
be greased three to four times a year. Agrease fitting is
provided.
H. Wheels
Some maintenance is required to maintain the finish and Four Winns uses the Accu-Lube™ bearing protection
retard rusting of painted rims. The wheels should be system on its trailers. The Accu-Lube™ design is sub-
cleanedwithdishwashingsoapandwaterandrinsedwith mersible and provides for grease flow that completely
cleanwaterimmediatelyaftereachuse. Waxingisrecom- repacks and protects the bearings. This lubrication sys-
mended three to four times each year.
tem disallows water entry, thus extending the life of the
bearings, spindle and hub.
Aluminum wheel rims may be cleaned with dishwashing
soap and water. However, cleaning products specifically Lubricate the bearings as follows:
for aluminum are available and can be used. Cleaners
may be obtained from Four Winns dealers and your local 1. Remove the rubber plug.
auto parts stores. The Mag wheel manufacturer recom-
mends a product by Priority One® called Pro-LongAlu- 2. Insert the grease gun into the grease fitting. Pump
minum/Chrome Wheel Protectant™. Galvanized rims
should be rinsed only with clean water immediately after
each use.
grease until old grease comes back out the front.
3. Remove old grease and reinstall rubber plug.
NOTICE
NOTICE
ALWAYS read the manufacturer’s instructions
on the label before using any product.
Most bearing failures are due to improper main-
tenance. Be sure to inspect bearings and seals
as noted in Section S-6B and refer to the
manufacturer’sliteratureincludedwithyourtrailer.
I.
Brakes
Keep the actuator clean of dirt, tar, and mud. The actua-
tor and internal parts should be lubricated at all times S - 6 AXLE INSPECTION & REPAIRS
with SAE 30 weight oil. The hitch ball may be lubricated
with automotive grease or lubricant made for hitch balls. As a general rule, repairs and maintenance should be
performed by qualified servicing personnel. Our axle
Periodically inspect the brake system for leaks. Check manufacturer recommends that a certified mechanic
all hoses for cuts or wear. Replace all defective hoses. should be consulted on the following items:
The master cylinder should be filled within 1/2 inch from
the top of the reservoir.
1. Broken axle
2.
3.
Brokenspring
Worn spring eye bushing parts
At the beginning of each year, inspect the brakes for ex-
cessive wear, have linings replaced if necessary.
4. Sagging springs
Weldingfatigue
Ifthebrakesneedbleeding,consultyourFourWinnsdealer 6. Serious leakage of seal
5.
for assistance. If unavailable, a brake or auto repair facil-
ity can perform the repair.
7.
8. Loose or worn suspension parts
Tirewear
9.
All brake related adjustments, inspections and prob-
lems
Refer to the manufacturer’s literature included in the
owner’s packet for additional information on the brake
system.
Vista™ Owner’s Manual
Section S
Page13
Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
---|---|
Tags | Four Winns Vista 248, Four Winns Vista 268, Four Winns Vista 288, Four Winns Vista 298, Four Winns Vista 328, Four Winns Vista 348 |
Model Year | 2004, 2005, 2006, 2007, 2008 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
Document File Type | |
Publisher | fourwinns.com |
Wikipedia's Page | Outboard Marine Corporation |
Copyright | Attribution Non-commercial |
(3 votes, average: 4.67 out of 5) Marine readers have rated 2004-2008 Four Winns Vista 248 268 288 288 298 328 348 Boat Owners Manual 4.7 out of 5.0 based on 3 product reviews.
i like this boat