2011 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX 60 Outboard Boat Motor Owners Manual

   Maintenance
STORAGE
TRANSPORTATION
DANGER
DO  NOT  run  the  engine  indoors  or
without adequate ventilation or per-
mit exhaust fumes to accumulate in
confined areas. Engine exhaust con-
tains   carbon   monoxide   which,   if
inhaled,   can  cause   serious   brain
damage or death.
If the outboard is laid down for transportation
or storage, the oiling system must be primed
before reusing the  outboard. Refer to   Prim-
ing the Oil System on page 17.
FLUSHING
Flush the outboard with fresh water  following
use  in  brackish,   salt  or  polluted  water   to
minimize  the accumulation  of scale  and  silt
deposits  in  cooling  system  passages.  The
outboard can  be flushed  on the  trailer or  at
dockside.  Place outboard  in  vertical (down)
position in a well ventilated area.
You must protect against natural environmen-
tal conditions that can be damaging to an out-
board. Your warranty  does not cover  engine
failure caused by these conditions.
Temperature  and  humidity  changes  during
storage period can cause corrosion of internal
engine components.
Winterization   prepares   your  outboard   for
long-term off-season  storage. During winter-
ization, the engine is “fogged” and extra oil is
used to coat internal engine components. Re-
fer  to  Long-Term  Storage (Winterization)
on page 41.
1)
Place the  outboard  in an  area with  good
drainage.
2)
3)
Connect garden hose to flushing port.
Turn on  the water.  It is  not necessary  to
run the engine for a good flushing.
Stabilize the fuel supply.  Fuel remaining in
your fuel tank can oxidize, resulting in loss of
octane and fuel system deposits.
Use Evinrude/Johnson 2+4  Fuel Conditioner
to  prevent  gum  and  varnish  deposits  from
forming in fuel  system components. Refer to
Fuel Additives on page 18.
WARNING
Prevent  injury  from  moving  engine
components.   Before   starting    the
outboard:
4)
Leave the outboard in vertical position long
enough  to  completely   drain  the  power-
head.
Shift it to NEUTRAL.
Keep hands, clothes, and hair clear
of powerhead.
NOTICE
If  you  cannot  store  the  out-
board in  the recommended  vertical posi-
tion,   be   sure   the   cooling    system   is
drained completely. Never place  the gear-
case   higher  than   the  powerhead.   Any
water remaining  in the exhaust  passages
can run into the cylinders  and cause seri-
ous damage.
Remove the propeller.
Store fuel tanks in a well-ventilated
area,   away   from   heat  and   open
flame.  Prevent  escape  of  liquid  or
vapors   which    could   accidentally
ignite.  Close  filler  cap  vent  screws
(if  equipped)  and  be  sure  any  dis-
connected fuel hoses do not drip.
40
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , , , , , , , , , , ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 76 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(4 votes, average: 4.25 out of 5)
Marine readers have rated 2011 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX 60 Outboard Boat Motor Owners Manual 4.3 out of 5.0 based on 4 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2011 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX 60 Outboard Boat Motor Owners Manual SKU UPC Model
giuseppe on Jul 15, 2018. manuale 115 e-tec

Desidero avere il manuale per conoscere il tipo di motore.
Sono interessato alla conoscenza di questo tipo di motore.


gerard murphy on Apr 13, 2016.

no problems with my 130 etec so far. Its a 2011 model. Used in saltwater.


mark on May 25, 2015.

looking for the perfect manual


Gjessing on May 20, 2013.



Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website