Using Your Evinrude E-TEC Outboard
Minimum Octane
FUEL SYSTEM INFORMATION
Your outboard is certified to operate on un-
leaded automotive gasoline with an octane
rating equal to or higher than:
Connecting the Fuel Hose
1) If the fuel hose is disconnected for any rea-
son, seal it to prevent spillage. Cap the fuel
fitting to prevent contamination.
•
•
87 (R+M)/2 AKI — Inside the U.S.
90 RON — Outside the U.S.
Using unleaded gasoline that contains methyl
tertiary butyl ether (MTBE) is acceptable
ONLY if the MTBE content does not exceed
2)
Connect the fuel hose to the 3/8 in. (9 mm)
fuel fitting. Fasten hose securely with
clamp (18.5 mm) from owner’s kit.
15%
by volume.
Alcohol Fuels
Your outboard has been designed to operate
using the specified fuels; however, be aware
of the following:
•
The boat’s fuel system may have different
requirements regarding the use of alcohol
fuels. Refer to the boat’s owner guide.
Alcohol blended fuel may cause engine per-
formance problems.
1
•
NOTICE
moisture that can cause corrosion of
metallic parts in the fuel system.
Alcohol
attracts
and
holds
1. Fuel hose – 3/8 in. (9 mm)
WARNING
If engine is equipped with a quick-
disconnect fuel hose, you MUST
disconnect the fuel hose from the
engine and the fuel tank to prevent
fuel leaks:
Using alcohol-extended fuels is acceptable
ONLY if the alcohol content does not exceed:
•
•
10% ethanol by volume; or
5% methanol with 5% cosolvents by volume.
•
Whenever the engine is NOT being
used
FUEL ADDITIVES
•
Whenever the engine is being trail-
ered
The only fuel additives approved for use in
your Evinrude E-TEC outboard are:
•
•
Use of other fuel additives can result in
poor performance or engine damage.
Evinrude/Johnson 2+4 Fuel Conditioner
Evinrude/Johnson Fuel System Cleaner
• Whenever the engine is in storage
NOTE: A small amount of fuel may
be released when the fuel connector
is disconnected.
Evinrude/Johnson 2+4 Fuel Conditioner will
help prevent gum and varnish deposits from
forming in fuel system components and will
remove moisture from the fuel system. It can
Store portable fuel tanks in well-ven-
tilated areas, away from heat
sources and open flames. Close the
be used continuously and should be used vent screw of the fuel tank cap, if
during any period when the outboard is not equipped, to prevent escape of fuel
being operated on a regular basis. Its use will
reduce spark plug fouling, fuel system icing,
and fuel system component deterioration.
Evinrude/Johnson Fuel System Cleaner will
help keep fuel injectors in optimal operating
condition.
or fuel vapors which could acciden-
tally ignite. Do not allow discon-
nected fuel hoses to leak fuel.
IMPORTANT: Fuel distribution hoses in the
boat must deliver fuel at the rate of flow need-
ed by the outboard. Minimum inside diameter
of fuel hoses must be 3/8 in. (9 mm).
18
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 115 hp, Evinrude 130 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude BX, Evinrude CX, Evinrude HL, Evinrude HX, Evinrude MX 60, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Marine readers have rated 2011 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX 60 Outboard Boat Motor Owners Manual 4.3 out of 5.0 based on 4 product reviews. Desidero avere il manuale per conoscere il tipo di motore.
Sono interessato alla conoscenza di questo tipo di motore.
no problems with my 130 etec so far. Its a 2011 model. Used in saltwater.
looking for the perfect manual