Using Your Evinrude E-TEC Outboard
OIL AND FUEL
OIL REQUIREMENTS
OILING SYSTEM
If the “LOW OIL” warning light illuminates,
you have a limited amount of time of normal
Evinrude/Johnson Brand Oils
Evinrude/Johnson outboard oils are formulat- operation before running out of oil. Refill the
ed to give best engine performance while oil tank with approved oil as soon as possible.
controlling piston and combustion chamber
deposits, providing superior lubrication, and
ensuring maximum spark plug life.
The following outboard oils are recommend-
ed for use in your Evinrude E-TEC outboard:
Always “top off” your oil tank prior to pro-
longed usage or long trips.
New outboards are programmed to use addi-
tional oil during the first five hours of opera-
tion above 2000 RPM.
•
•
•
Evinrude/Johnson XD100;
Evinrude/Johnson XD50; or
Evinrude/Johnson XD30.
Refer to Engine Monitoring on page 34.
NOTICE
When operating in conditions
Evinrude/Johnson
XD100 oil must be used.
under
32°F
(0°C),
Evinrude/Johnson XD100 Oil
Evinrude/Johnson XD100 oil is preferred
for your Evinrude E-TEC outboard. This
synthetic formula oil provides uncompro-
mised lubrication and superior performance,
Always keep an extra supply of outboard oil in
the boat. Refer to Oil Requirements on page
16.
even in extreme conditions—especially in If you run the oil tank empty, you MUST refill
cold temperatures down to 0°F (-17°C).
the oil tank and prime the oil system before
using the engine. Refer to Filling the Oil
Tank on page 17 and Priming the Oil Sys-
tem on page 17.
If requested, an authorized dealer can pro-
gram your Evinrude E-TEC outboard EMM
for the exclusive use of Evinrude/Johnson
XD100. Only an authorized Evinrude deal- If the oil hose is disconnected for any reason,
er can program your outboard for this op- seal it to prevent spillage. Install a cap on the
tional benefit. Oil consumption is reduced if hose fitting to prevent contamination.
the outboard is programmed for exclusive
use of Evinrude/Johnson XD100 as com-
pared to using a conventional oil. The XD100
oil setting is not available on all models.
You must use an oil tank equipped with a filter
and an oil supply hose. The oil system must
be purged if air is in the oil supply hose. Refer
to Priming the Oil System on page 17.
IMPORTANT: If your EMM has been pro-
grammed for Evinrude/Johnson XD100,
DO NOT use any other oil unless in an emer-
gency. If Evinrude/Johnson XD100 is tempo-
rarily unavailable, a one-time-only use of an
oil that meets NMMA TC-W3 certification
standards is allowed. If you discontinue using
Evinrude/Johnson XD100, you MUST first re-
turn to your Dealer to have the EMM repro-
grammed back to the original factory setting.
Other Oils
If Evinrude/Johnson brand oils are not avail-
able, you must use an oil that meets NMMA
TC-W3 certification standards.
Install the oil tank following the instructions
IMPORTANT: Failure to follow oil specifica- provided with the unit.
tions could void the engine warranty if a lubri-
cation-related failure occurs.
16
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 115 hp, Evinrude 130 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude BX, Evinrude CX, Evinrude HL, Evinrude HX, Evinrude MX 60, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5)
Marine readers have rated 2011 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL HX CX MX 60 Outboard Boat Motor Owners Manual 4.3 out of 5.0 based on 4 product reviews. Desidero avere il manuale per conoscere il tipo di motore.
Sono interessato alla conoscenza di questo tipo di motore.
no problems with my 130 etec so far. Its a 2011 model. Used in saltwater.
looking for the perfect manual