CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR EMISSION CONTROL WARRANTY RIGHTS AND OBLIGATION
The California Air Resources Board and Bombardier Recreational Products (“BRP”) are pleased to explain the emission control
system warranty on your 2010 Evinrude E-TEC outboard. In California, new outboard engines must be designed, built, and
equipped to meet the State's stringent anti-smog standards. BRP must warrant the emission control system on your outboard for
the periods of time listed below provided there has been no abuse, neglect, or improper maintenance of your outboard.
Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and catalytic
converter. Also included may be hoses, belts, connectors, and other emission-related assemblies.
Where a warrantable condition exists, BRP will repair your outboard at no cost to you including diagnosis, parts, and labor provided
that such work is performed by an authorized BRP dealer.
Manufacturer's Limited Warranty Coverage
This emission limited warranty covers Evinrude outboards certified and produced by BRP for sale in California, that are originally
sold in California to a California resident, or subsequently warranty-registered to a California resident. The BRP U.S. and Canada
limited warranty conditions for Evinrude outboards are still applicable to these models with the necessary modifications.
Select emission control parts of your Evinrude E-TEC outboard are warranted from the date of purchase by the first retail consumer
or the date the product is first put to use, whichever occurs first, for a period of: 4 years, or for 250 hours of use, whichever occurs
first.
However, warranty coverage based on the hourly period is only permitted for outboards equipped with the appropriate hour meters
or their equivalent. If any emission-related part on your engine is defective under warranty, the part will be repaired or replaced by
BRP.
Parts covered are:
1.
Electrical System
4. Air Induction System
A. Reed Valves
B. Throttle Body Assembly
C. Intake Manifold
A. EMM (Engine Management Module)
B. Spark Plugs and Wires
C. Ignition Coils
D. Wiring Harness
5.
Oil System
2.
Exhaust System
A. Oil Injector
A. Inner Exhaust Housing
B. Oil Lines, Fittings, and Clamps
B. Adaptor (Exhaust Manifold)
C. Megaphone (Inner Exhaust)
6. Sensors
A. Air Temperature Sensor
B. Crank Position Sensor
C. Throttle Position Sensor
D. Water Temperature Sensor
E. Thermostat
3.
A. Fuel Lift Pump
B. Fuel Supply Pump
C. Fuel Injectors
Fuel System
D. Vapor Separator
E. Fuel Lines, Fittings, and Clamps
7. Gaskets
A. All Emission Component Gaskets
The emission warranty covers damage to other engine components that is caused by the failure of a warranted part.
The BRP Operator's Guide provided contains written instructions for the proper maintenance and use of your outboard. All emis-
sion warranty parts are warranted by BRP for the entire warranty period of the outboard, unless the part is scheduled for replace-
ment as required maintenance in the Operator's Guide.
Emission warranty parts that are scheduled for replacement, as required maintenance, are warranted by BRP for the period of time
before the first scheduled replacement date for that part. Emission warranty parts that are scheduled for regular inspection but not
regular replacement are warranted by BRP for the entire warranty period of the outboard. Any emission warranty part repaired or
replaced under the terms of this warranty statement is warranted by BRP for the remainder of the warranty period of the original
part. All parts replaced under this limited warranty become the property of BRP.
Maintenance receipts and records should be transferred to each subsequent owner of the outboard.
Owner's Warranty Responsibilities
As the outboard owner, you are responsible for the performance of the required maintenance listed in your Operator's Guide. BRP
recommends that you retain all receipts covering maintenance on your outboard, but BRP cannot deny warranty solely for the lack
of receipts or your failure to ensure the performance of all scheduled maintenance.
As the outboard owner, you should however be aware that BRP may deny you warranty coverage if your outboard or a part has
failed due to abuse, neglect, improper maintenance, or unapproved modifications.
You are responsible for presenting your outboard to an authorized BRP dealer as soon as a problem exists. The warranty repairs
will be completed in a reasonable amount of time, not to exceed 30 days.
For any questions regarding your warranty rights and responsibilities or for the name and location of the nearest authorized BRP
dealer, contact BRP US Inc. / Outboard Engines Division, After Sales Support, P.O Box 597, Sturtevant, WI 53177, 1-847-689-
7090 or visit
www.evinrude.com.
71
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude PL, Evinrude RL, Evinrude SL, Evinrude TL |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 3.25 out of 4)
Marine readers have rated 2010 Evinrude 40 50 60 hp E-TEC RL TL PL SL Outboard Boat Motor Owners Manual 3.3 out of 4.0 based on 4 product reviews. This is a excellent product.i like it vey much
This is a excellent product. I like it very much
The material is very useful .use it every year
verry good to find facts about Evinrude.