USING YOUR EVINRUDE E-TEC OUTBOARD
OIL AND FUEL
OIL REQUIREMENTS
OILING SYSTEM INFORMATION
Evinrude/Johnson Brand Oils
If the “LOW OIL” warning light illuminates, you have ap-
proximately five hours of normal operation before running
out of oil. Refill the oil tank at next convenient opportunity.
Evinrude/Johnson outboard oils are formulated to give
best engine performance while controlling piston and com-
bustion chamber deposits, providing superior lubrication,
and ensuring maximum spark plug life.
Always “top off” your oil tank prior to prolonged usage or
long trips.
New outboards are programmed to use additional oil dur-
ing the first two hours of operation above 2000 RPM.
The following outboard oils are recommended for use in
your Evinrude E-TEC outboard:
•
•
•
Evinrude/Johnson XD100;
Evinrude/Johnson XD50; or
Evinrude/Johnson XD30.
NOTICE
0°C
used.
When operating in conditions under
(32°F), Evinrude/Johnson oil must be
XD100
Evinrude/Johnson XD100 Oil
Filling the Oil Tank
Evinrude/Johnson XD100 oil is preferred for your
Evinrude E-TEC outboard. This synthetic formula oil pro- Release the port and starboard engine cover latches by
vides uncompromised lubrication and superior perfor-
mance, even in extreme conditions—especially in cold
temperatures down to -17°C (0°F).
turning each handle downward.
If requested, an authorized dealer can program your
Evinrude E-TEC outboard EMM for the exclusive use of
Evinrude/Johnson XD100. Only an authorized Evinrude
dealer can program your outboard for this optional
benefit.
Oil consumption is reduced if the outboard is programmed
for exclusive use of Evinrude/Johnson XD100 as com-
pared to using a conventional oil.
IMPORTANT: If your EMM has been programmed for
Evinrude/Johnson XD100, DO NOT use any other oil un-
less in an emergency. If Evinrude/Johnson XD100 is tem-
porarily unavailable, a one-time-only use of an oil that
meets NMMA TC-W3 certification standards is allowed. If
you discontinue using Evinrude/Johnson XD100, you
MUST first return to your Dealer to have the EMM repro-
grammed back to the original factory setting.
Pull up on the tilt handle to release the engine cover seal
on the engine cover.
Other Oils
If Evinrude/Johnson brand oils are not available, you must
use an oil that meets NMMA TC-W3 certification stan-
dards.
1
IMPORTANT: Failure to follow oil specifications could
void the engine warranty if a lubrication-related failure oc-
curs.
1.
Tilt handle
20
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude PL, Evinrude RL, Evinrude SL, Evinrude TL |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 3.25 out of 4)
Marine readers have rated 2010 Evinrude 40 50 60 hp E-TEC RL TL PL SL Outboard Boat Motor Owners Manual 3.3 out of 4.0 based on 4 product reviews. This is a excellent product.i like it vey much
This is a excellent product. I like it very much
The material is very useful .use it every year
verry good to find facts about Evinrude.