TILTING AND TRIM
Tilt
When you are finished tilting the outboard, disengage the
tilt lock lever:
The full tilt is often used to tilt the outboard for clearance
when beaching, mooring, or launching.
1) Tilt the outboard UP.
2)
3)
Flip the tilt lock lever up.
Lower the outboard to operating position.
Trim
Manual Release Valve
In most operating conditions, it is recommended to trim
the outboard to the full down position when accelerating.
Once on plane, trim the outboard up for best performance.
If needed, the outboard will tilt up or down manually, using
the manual release valve.
Over-trimming increases engine RPM while decreasing
speed. The best trim setting is when the highest speed is
achieved with the lowest engine RPM.
WARNING
Keep everyone clear of a tilted outboard when back-
ing out the manual release screw. The outboard
could drop suddenly and forcibly. Be sure to tighten
the manual release screw after manually reposition-
ing the outboard. Tightening the screw also reacti-
vates the outboard’s impact protection and reverse
thrust capability.
Shallow Water Drive
You can tilt the outboard to any position within the tilt
range but DO NOT run the engine faster than idle speed.
If idling a tilted outboard, keep its water intakes sub-
merged at all times.
1)
Turn the manual release screw counterclockwise, slow-
ly (about 3 1/2 turns), until it lightly contacts its retain-
ing ring.
2)
3)
Reposition the outboard.
Tighten the manual release valve to hold the outboard
in its new position.
1
1.
2.
Trim range
Tilt range
Tilt Lock Lever
If you intend to leave the outboard tilted for a period of time,
engage the tilt lock lever:
1.
Manual release screw
1)
2)
3)
Tilt the outboard UP using the trailering tilt switch.
Flip the tilt lock lever down.
Lower the outboard until the tilt lock lever rests solidly
on the stern brackets.
1
1.
Tilt support lever
41
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude PL, Evinrude RL, Evinrude SL, Evinrude TL |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 3.25 out of 4)
Marine readers have rated 2010 Evinrude 40 50 60 hp E-TEC RL TL PL SL Outboard Boat Motor Owners Manual 3.3 out of 4.0 based on 4 product reviews. This is a excellent product.i like it vey much
This is a excellent product. I like it very much
The material is very useful .use it every year
verry good to find facts about Evinrude.