Maintenance
SYMPTOM
TROUBLESHOOTING
POSSIBLE CAUSE
Starter motor will not operate
• Shift handle not in NEUTRAL.
•
•
Fuse blown.
Battery is dead.
Engine will not start
• Not following starting instructions. Refer to En-
gine Starting on page 21.
•
•
•
•
•
•
Fuel tank empty.
Fuel hose kinked.
Fuel system contaminated with water or dirt.
Fuel filter obstructed.
Throttle not at IDLE. Return throttle to IDLE.
Spark plugs incorrect. Refer to Spark Plugs on
page 43.
Spark plugs improperly gapped, carboned,
burned, or wet.
Fuse blown.
Flashing “Water Temp” or hot light, refer to En-
gine Monitoring on page 17 and Engine Over-
heating on page 19.
•
•
•
•
Flashing “Check Engine” or “Chk Eng” light, refer
to Engine Monitoring on page 17.
Engine will not idle properly
Engine loses power
• Debris on propeller.
•
Spark plugs damaged or incorrect. Refer to
Specifications on page 51.
•
Fuel system contaminated with water or dirt.
• Spark plugs damaged or incorrect. Refer to
Spark Plugs on page 43.
•
•
•
Fuel filter obstructed.
Fuel system contaminated with water or dirt.
Water intakes obstructed and cooling system not
operating correctly. Refer to Engine Overheating
on page 19.
Oiling system malfunction.
S.A.F.E. protection mode activated. Refer to En-
gine Monitoring on page 17.
•
•
Engine runs, but makes little or
no progress
• Propeller hub loose, slipping.
• Propeller blades bent or missing.
•
•
Propeller shaft bent.
Propeller debris.
Warning system activates
• Refer to Engine Monitoring on page 17.
44
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude WEL, Evinrude WEX |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2009 Evinrude 75 90 hp E-TEC PL PX WEL WEX Outboard Motor Owners Manual 5.0 out of 5.0 based on 1 product reviews. very good, had all info I needed