X OPERATION
matically disengage. Slowly lower outboard to Outboard Angle Adjustment
its normal operating position.
The outboard should be perpendicular to the
water when the boat is underway at full
speed. This adjustment can only be deter-
mined by water testing the boat. Set angle ad-
justment for your normal load.
Place the outboard in full TILT position. Refer
to Trailering on page 28.
1
•
Turn the angle adjusting rod handle up.
Push in against spring so retainer will re-
lease, then slide rod assembly all the way
out.
•
•
Insert rod in desired position. Make sure rod
passes through both stern brackets.
Push in against spring and turn rod handle
down. Make sure the retainer dropped into
lock position.
1.
Tilt grip
Outboard angle adjustment
Tilt Lock Lever
IMPORTANT: DO NOT use the tilt lock lever
while trailering. Refer to Trailering on page
28.
If you intend to leave the outboard tilted for a
period of time, engage the tilt lock lever:
1)
Tilt the outboard UP using the trailering tilt
switch.
2)
3)
Flip the tilt lock lever down.
Lower the outboard until the tilt lock lever
rests solidly on the stern brackets.
When you are finished tilting the outboard,
disengage the tilt lock lever:
1)
2)
3)
Tilt the outboard UP.
Flip the tilt lock lever up.
Lower the outboard to operating position.
27
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude WEL, Evinrude WEX |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2009 Evinrude 75 90 hp E-TEC PL PX WEL WEX Outboard Motor Owners Manual 5.0 out of 5.0 based on 1 product reviews. very good, had all info I needed