X OPERATION
Trim angle adjustment
Tilt Lock Lever
Manual Release Valve
If needed, the outboard will tilt up or down
manually, using the manual release valve.
IMPORTANT: DO NOT use the tilt lock lever
while trailering. Refer to Trailering on page
28.
If you intend to leave the outboard tilted for a
period of time, engage the tilt lock lever:
WARNING
Keep everyone clear of a tilted out-
board when backing out the manual
release screw. The outboard could
drop suddenly and forcibly. Be sure to
tighten the manual release screw after
manually repositioning the outboard.
Tightening the screw also reactivates
the outboard’s impact protection and
reverse thrust capability.
1)
Tilt the outboard UP using the trailering tilt
switch.
Flip the tilt lock lever down.
Lower the outboard until the tilt lock lever
rests solidly on the stern brackets.
2)
3)
1)
Turn the manual release valve counter-
clockwise, slowly (about 3 1/2 turns), until
it lightly contacts its retaining ring.
Reposition the outboard.
Tighten the manual release valve to hold
the outboard in its new position.
2)
3)
When you are finished tilting the outboard,
disengage the tilt lock lever:
1
1)
2)
3)
Tilt the outboard UP.
Flip the tilt lock lever up.
Lower the outboard to operating position.
1.
Manual release valve
25
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude WEL, Evinrude WEX |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2009 Evinrude 75 90 hp E-TEC PL PX WEL WEX Outboard Motor Owners Manual 5.0 out of 5.0 based on 1 product reviews. very good, had all info I needed