Bringing out of storage
Immediately before launching the drive’s sacrificial
anodes must be cleaned off with emery paper. If
an anode is 2/3 its original size (1/3 eroded), it
should be replaced.
●
Check oil level in the engine and drive/reverse
gear. Top up if required. For oil quality: See
chapter Technical Data.
●
Note! If there is inhibiting oil in the system drain
and fill with new oil, change the filters.
IMPORTANT Do not use steel brushes or any
steel tools for cleaning the anodes. This can re-
sult in reduced galvanic protection.
●
●
●
Close/tighten drain cocks/plugs.
Check belts.
●
●
Reinstall the propeller(s).
Check condition of rubber hoses and tighten hose
clamps.
Launch the boat. Check there is not fuel, water or
exhaust leakage. Check that all control functions
are operating normally.
●
●
Connect up the charged batteries.
Paint drive and hull: See following section.
76
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 3.0 GS, Volvo Penta 3.0 SX, Volvo Penta 4.3 DP-S, Volvo Penta 4.3 Gi, Volvo Penta 4.3 GL, Volvo Penta 4.3 GS, Volvo Penta 4.3 SX, Volvo Penta 5.0 DP-S, Volvo Penta 5.0 Gi, Volvo Penta 5.0 GL, Volvo Penta 5.0 SX, Volvo Penta 5.7 DP-S, Volvo Penta 5.7 GS, Volvo Penta 5.7 GSi, Volvo Penta 5.7 SX |
| Model Year | 1995, 1996, 1997, 1998, 1999, 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(7 votes, average: 4.71 out of 5)
Marine readers have rated 1995-2000 Volvo Penta 3 0 4 3 5 0 5 7 GS SX GL DP S GI GSI Operators Manual 4.7 out of 5.0 based on 7 product reviews. Needed to replace my manual and this was the ticket. Thanks!
i like volvo penta and marine need manual
Need more engine shop manuals.5.0l gi
Needed a quick reference guide and this was the answer.
This is a well needed item!!!!!
Great stuff very helpful
can i have by mail one of your manual for the engine volvo 4.3 GI please.