Pivot housing (SX, DP-S)
To drain cavity in pivot housing, tilt drive unit to the
full tilt (up) position and remove the water drain plug
(
G) from the port side of the pivot housing. Tilt the
G
drive unit to the full tilt down position. Allow unit to
drain. After unit has completely drained, replace pivot
housing plug. Inspect drive unit water intake screen
for obstructions.
Oil coolers
Remove the lower water hose from the oil cooler. If
cooler is mounted horizontally, remove either hose,
loosen mounting bolt, and tip open end of cooler down
to drain.
IMPORTANT Failure to completely drain the
cooling system will result in serious damage to
the engine, exhaust manifolds, pivot housing,
and drive unit when temperatures go below free-
zing. To assure complete drainage, probe all
drain openings with a piece of wire to remove
any blockage.
48
Categories | Volvo Penta Manuals |
---|---|
Tags | Volvo Penta 3.0 GS, Volvo Penta 3.0 SX, Volvo Penta 4.3 DP-S, Volvo Penta 4.3 Gi, Volvo Penta 4.3 GL, Volvo Penta 4.3 GS, Volvo Penta 4.3 SX, Volvo Penta 5.0 DP-S, Volvo Penta 5.0 Gi, Volvo Penta 5.0 GL, Volvo Penta 5.0 SX, Volvo Penta 5.7 DP-S, Volvo Penta 5.7 GS, Volvo Penta 5.7 GSi, Volvo Penta 5.7 SX |
Model Year | 1995, 1996, 1997, 1998, 1999, 2000 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(7 votes, average: 4.71 out of 5) Marine readers have rated 1995-2000 Volvo Penta 3 0 4 3 5 0 5 7 GS SX GL DP S GI GSI Operators Manual 4.7 out of 5.0 based on 7 product reviews.
Needed to replace my manual and this was the ticket. Thanks!
i like volvo penta and marine need manual
Need more engine shop manuals.5.0l gi
Needed a quick reference guide and this was the answer.
This is a well needed item!!!!!
Great stuff very helpful
can i have by mail one of your manual for the engine volvo 4.3 GI please.