3.0
models
Remove the longer cooling hose (1) from the thermo-
stat housing, then bend the hose down so that it emp-
ties completely. Remove and empty the thicker coo-
ling hose (2) from the circulation pump. Remove the
drain plug (3) at the exhaust pipe, then clear the hole
of any impurities using steel wire so that the water
can run out freely. Remove the drain plug (4) from the
cylinder block, then clean the drainage hole. Remove
both hoses (5) from the seawater pump and drain
them. Turn the engine over on the starter motor for a
second (do not allow the engine to start!) so that
the water remaining in the seawater pump comes out.
Refit all the hoses and drain plugs. Check the tight-
ness of all the hose clips. Do not forget to open the
seawater cock (if fitted) before starting the engine
again.
1
2
3
4
5
5
47
Categories | Volvo Penta Manuals |
---|---|
Tags | Volvo Penta 3.0 GS, Volvo Penta 3.0 SX, Volvo Penta 4.3 DP-S, Volvo Penta 4.3 Gi, Volvo Penta 4.3 GL, Volvo Penta 4.3 GS, Volvo Penta 4.3 SX, Volvo Penta 5.0 DP-S, Volvo Penta 5.0 Gi, Volvo Penta 5.0 GL, Volvo Penta 5.0 SX, Volvo Penta 5.7 DP-S, Volvo Penta 5.7 GS, Volvo Penta 5.7 GSi, Volvo Penta 5.7 SX |
Model Year | 1995, 1996, 1997, 1998, 1999, 2000 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(7 votes, average: 4.71 out of 5) Marine readers have rated 1995-2000 Volvo Penta 3 0 4 3 5 0 5 7 GS SX GL DP S GI GSI Operators Manual 4.7 out of 5.0 based on 7 product reviews.
Needed to replace my manual and this was the ticket. Thanks!
i like volvo penta and marine need manual
Need more engine shop manuals.5.0l gi
Needed a quick reference guide and this was the answer.
This is a well needed item!!!!!
Great stuff very helpful
can i have by mail one of your manual for the engine volvo 4.3 GI please.