Oil and oil filters. Replacement
The oil should be changed when the engine is hot.
Stop the engine. Suck out oil through the oil scaveng-
ing/bilge pipe.
WARNING! Hot oil can cause burns.
Unscrew the old filter. NOTE! Avoid oil spillage.
Check the mating surface of the engine is clean.
Moisten the filter rubber gasket with a little oil. Screw
on the new filter by hand until it is in contact with the
mating surface. And then a further half turn but no
more!
Top up oil to correct level. Start the engine and let it
idle. Stop the engine. Check that there are no leaks
round the oil filter and the oil level, top up if necessa-
ry. See chapter Technical Data for the grade of oil.
NOTE! Collect up the old oil and filter for deposit at a
proper disposal site.
44
Categories | Volvo Penta Manuals |
---|---|
Tags | Volvo Penta 3.0 GS, Volvo Penta 3.0 SX, Volvo Penta 4.3 DP-S, Volvo Penta 4.3 Gi, Volvo Penta 4.3 GL, Volvo Penta 4.3 GS, Volvo Penta 4.3 SX, Volvo Penta 5.0 DP-S, Volvo Penta 5.0 Gi, Volvo Penta 5.0 GL, Volvo Penta 5.0 SX, Volvo Penta 5.7 DP-S, Volvo Penta 5.7 GS, Volvo Penta 5.7 GSi, Volvo Penta 5.7 SX |
Model Year | 1995, 1996, 1997, 1998, 1999, 2000 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(7 votes, average: 4.71 out of 5) Marine readers have rated 1995-2000 Volvo Penta 3 0 4 3 5 0 5 7 GS SX GL DP S GI GSI Operators Manual 4.7 out of 5.0 based on 7 product reviews.
Needed to replace my manual and this was the ticket. Thanks!
i like volvo penta and marine need manual
Need more engine shop manuals.5.0l gi
Needed a quick reference guide and this was the answer.
This is a well needed item!!!!!
Great stuff very helpful
can i have by mail one of your manual for the engine volvo 4.3 GI please.