Lubrication. Primary shaft bearings
Remove the drive from the mounting fork. Grease
the primnary shaft bearing via the nipple (1) using a
grease gun. Use an EP wheel bearing grease. Press
in grease until it is forced out of the bearing. If the old
grease indicates water contamination the bearing
must be inspected and replaced if damaged.
1
WARNING! Removal of the drive requires spe-
cial knowledge and tools. A falling drive can
cause serious personalinjury. Please contact
your nearest authorized Volvo Penta dealer for
assistance.
IMPORTANT! Failure to lubricate the gimbal
bearing and universal joints each year will result
in damage to the pivot housing and drive unit.
Lubrication. U-joint
Remove the drive from mounting fork. The U-joint is
lubricated by the two lubricating nipples (A). Press in
grease until it is forced out of the bearing. Use an EP
wheel bearing grease.
A
NOTE! The splined joint on the shaft (B) must be
greased using molybdenum grease. Lubricate the
two O rings (C) with a little engine oil.
C
B
WARNING! Removal of the drive requires spe-
cial knowledge and tools. A falling drive can
cause serious personal injury. Please contact
your nearest authorized Volvo Penta dealer for
assistance.
Bellows. Replacement
Check the condition of the universal joint and ex-
haust pipe bellows every year. If there are cracks or
any other defects, they should be replaced. They
should be replaced every second year.
WARNING! Never work on the bellows or hy-
draulic components of the drive unless you
have first locked the drive in the folded up posi-
tion, in such a way that it can not possibly fall
down. A drive which falls down can cause seve-
re personal injury.
Bellows replacement means that the drive has to be
removed from the drive shaft bearing housing. Drive
shaft removal requires knowledge and special tools.
Contact your Volvo Penta workshop for assistance.
66
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 3.0 GS, Volvo Penta 3.0 SX, Volvo Penta 4.3 DP-S, Volvo Penta 4.3 Gi, Volvo Penta 4.3 GL, Volvo Penta 4.3 GS, Volvo Penta 4.3 SX, Volvo Penta 5.0 DP-S, Volvo Penta 5.0 Gi, Volvo Penta 5.0 GL, Volvo Penta 5.0 SX, Volvo Penta 5.7 DP-S, Volvo Penta 5.7 GS, Volvo Penta 5.7 GSi, Volvo Penta 5.7 SX |
| Model Year | 1995, 1996, 1997, 1998, 1999, 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(7 votes, average: 4.71 out of 5)
Marine readers have rated 1995-2000 Volvo Penta 3 0 4 3 5 0 5 7 GS SX GL DP S GI GSI Operators Manual 4.7 out of 5.0 based on 7 product reviews. Needed to replace my manual and this was the ticket. Thanks!
i like volvo penta and marine need manual
Need more engine shop manuals.5.0l gi
Needed a quick reference guide and this was the answer.
This is a well needed item!!!!!
Great stuff very helpful
can i have by mail one of your manual for the engine volvo 4.3 GI please.