2009 Evinrude 55 hp MFE MRL MJRL Outboard Boat Motor Owners Manual

X INSTALLATION
INSTALLATION
TRANSOM HEIGHT
Make  sure the  transom height  matches the
length of the outboard to be installed.
WARNING
The   outboard  must   not   exceed   the
maximum horsepower indicated on  the
boat’s capacity plate.  Such overpower-
ing can  cause loss  of control. Contact
the  boat’s  manufacturer  if   your  boat
lacks a capacity plate.
A  19 to  21 in.  (48.3  to 53.3  cm) transom
height  uses a  20  in. (50.8  cm)  shaft out-
board.
The shaft  length of  the outboard  being in-
stalled should match  the transom height of
the boat.
Boats designed for remote-steered out-
boards  might   be   overpowered  by   a
tiller-steered outboard of the  maximum
rated  horsepower.   Refer  to  the   boat
manufacturer if you are unsure.
Determine transom height by measuring from
the top edge of the transom, along the center-
line.
Incorrectly matched boat and  outboard
transom heights  can cause  boat insta-
bility and loss of control. Refer to Tran-
som Height.
1
3
Prevent lateral movement and possible
outboard  loss  by using  the  mounting
hardware supplied or hardware of suffi-
cient size,  strength,  and quality.  Refer
to Installing the Outboard on page 40.
2
A mounting surface that is damaged  or
too thin to support your outboard while
underway  might fail  during  operation,
causing a  loss of  control. Be  sure the
boat’s transom  or mounting bracket  is
structurally  sound  and between  1  5/8
in.  (41  mm)  and 2  3/4  in.  (70  mm)  in
thickness.
1.
2.
3.
Centerline
Antiventilation plate
Transom Height
Boat   performance   depends   on   outboard
mounting height.
Generally,  the  anti-ventilation   plate  of  the
gearcase should align  with the bottom of the
hull.
Test outboard and boat performance at differ-
ent  heights   until  the  best   performance  is
achieved.
IMPORTANT: Use an appropriate hoist to lift
the engine. Refer to Specifications  on page
38
for engine weight.
IMPORTANT:  Be sure  that  outboard  water
pressure  is  not   adversely  affected  by  the
mounting height of the outboard.
39
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 54 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website