2009 Evinrude 55 hp MFE MRL MJRL Outboard Boat Motor Owners Manual

   Using the MFE Outboard
FUEL SYSTEM OPERATION
FUEL SELECTOR SWITCH
CAUTION
Connecting the Fuel Hose
Connect the fuel hose  connector to the hose
from the boat mounted fuel tank.
Operation with the  fuel selector switch
in   the   wrong  position   could   cause
internal engine damage not covered  by
the outboard’s limited warranty.
1
The Engine  Management Module (EMM)  in-
cludes programs allowing the engine to run on
several types  of  fuel. You  MUST select  the
correct program for the fuel being used.
To use jet fuel, or kerosene, press the fuel se-
lector switch IN.
To use gasoline, pull  the fuel selector switch
OUT to expose the red indicator ring.
1.
Fuel hose and connector
WARNING
Store  fuel   tanks  in   a   well-ventilated
area, away  from  heat and  open flame.
Prevent   escape  of   liquid   or   vapors
which could accidentally ignite.
When switching from one fuel to another:
Connect the fuel supply hose to the desired
fuel supply.
Adjust the selector switch on the port side of
the outboard for the new fuel.
Restart  the  engine   to  reset  the  EMM
changing the switch has no effect while the
engine is running.
IMPORTANT: Fuel  distribution hoses  in the
boat must deliver fuel at the rate of flow need-
ed by the outboard. Minimum inside diameter
of fuel hoses must be 3/8 in. (9 mm).
Fuel systems  with built-in  tanks,  particularly
those that include antisiphon valves and filter/
primer units,  may have  restrictions that  pre-
vent  the  engine  fuel  pump  from  delivering
enough fuel under all conditions. This can re-
sult in a loss of performance.
The EMM calculates when the previous fuel
remaining in the engine has been used and
switches the program at that time.
The engine may run noticeably rough during
the transition period.
IMPORTANT:  Diesel  is an  emergency  fuel
ONLY. If diesel must be used, the fuel selec-
tor switch should  be in the  Heavy Fuel posi-
tion.
FUEL SYSTEM PRIMING
If the outboard is run out of fuel, refill the fuel
tank and squeeze  the primer bulb  until firm.
The high pressure  fuel circuits and  injectors
will prime as the outboard is cranked with the
starter.
14
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 54 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website