2009 Evinrude 55 hp MFE MRL MJRL Outboard Boat Motor Owners Manual

FUEL AND OIL
FUEL REQUIREMENTS
WARNING
Gasoline
Use  unleaded  automotive gasoline  with  an
octane rating equal to or higher than:
87 (R+M)/2 AKI, or 90 RON
Gasoline  is  extremely  flammable  and
highly  explosive  under  certain  condi-
tions. Improper  handling  of fuel  could
result   in   property   damage,   serious
injury or death.
Use unleaded  gasoline that  contains methyl
tertiary butyl ether (MTBE) ONLY if the MTBE
content does not exceed 15% by volume.
Alcohol-extended fuel is  acceptable ONLY if
the alcohol content does not exceed:
•  10% ethanol by volume; or
•  5% methanol with 5% cosolvents by volume.
Leaking fuel is a fire and explosion haz-
ard. All parts in  the fuel system should
be inspected frequently and replaced  if
signs  of  deterioration  or  leakage  are
found.  Inspect  the   fuel  system  each
time you  refuel, each time  you remove
the engine cover and annually.
Emergency Fuel
In a combat emergency when no other fuel is
available, diesel  DFM-E76 or  BioDiesel  can
be used. Operating time  should be limited to
the  duration of  the  combat emergency  and
the operator should return to operating on one
of the approved fuels as soon as possible.
Idle  and  low speed  operation  (below  3000
RPM)  should  be  avoided  to  prevent  spark
plug fouling  when operating  on diesel DFM-
E76 or BioDiesel.
Always turn off the engine before fuel-
ing.
Never  permit  anyone  other  than  an
adult to refill the fuel tank.
Do not fill  the fuel tank all  the way to
the top  or fuel  may overflow  when it
expands due to heating by the sun.
Remove portable  fuel tanks  from the
boat before fueling.
IMPORTANT: If  the outboard  MUST be  run
on diesel, it should then be run on gasoline for
a minimum of 20 minutes to clean internal en-
gine components.
Always wipe off any fuel spillage.
Do not smoke, or allow open flames or
sparks, or use electrical devices such
as cellular phones  in the vicinity of  a
fuel leak or while fueling.
Fuel Additives (gasoline only)
Always work in a well ventilated area.
The only fuel additives approved for use are:
Use  of other  fuel  additives can  result  in
poor performance or engine damage.
Evinrude/Johnson 2+4 Fuel Conditioner
Evinrude/Johnson Fuel System Cleaner
Evinrude  MFE models  are designed  to  use
several different fuel types. Refer to Fuel Se-
lector switch on page 14.
Heavy Fuels
Evinrude/Johnson  2+4 Fuel  Conditioner will
help prevent  gum and  varnish deposits  and
will remove moisture  from the fuel system.  It
can be used continuously and should be used
during any  period when  the outboard  is  not
being operated on a regular basis.
Approved heavy fuels include:
JP4, JP5, JP8
Jet A, Jet B
Kerosene
Evinrude/Johnson
Fuel
System
Cleaner
IMPORTANT:
Evinrude/Johnson
XD100
helps keep fuel injectors in good condition.
outboard oil MUST be used when outboard is
run on heavy fuels. DO NOT use Diesel DFM-
E76
or
BioDiesel
fuels.
For
combat
emergency situations  see  Emergency Fuel
on p. 13.
13
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 54 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website