Maintenance
TRANSPORTING THE OUTBOARD FLUSHING
If desired, the outboard can be flushed after
each use on a trailer or at dockside while it is
vertical.
or storage, the oiling system must be primed 1) Place the outboard in an area with good
If the outboard is laid down for transportation
before reusing the outboard. Refer to Prim-
ing the Oil System on page 17.
drainage.
2)
3)
Connect garden hose to flushing port.
Turn on the water. It is not necessary to
run the engine for a good flushing.
If the outboard is laid down for transportation
or storage, it should be laid on its back.
If the engine is transported laying on its side,
protect the motor covers, by laying it on an
old blanket or other soft cloth.
4)
Leave the outboard in vertical position long
enough to completely drain the power-
head.
1
IMPORTANT: If you cannot store the out-
board in the recommended vertical position,
be sure the cooling system is drained com-
pletely. Never place the gearcase higher than
the powerhead. Any water remaining in the
exhaust passages can run into the cylinders
and cause serious damage.
007043
1.
Transport outboard resting on bumpers
50
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 25 hp, Evinrude 30 hp, Evinrude PL, Evinrude RL, Evinrude TE, Evinrude TEL |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Marine readers have rated 2009 Evinrude 25 30 hp E-TEC RL TE TEL PL Outboard Boat Owners Manual 4.0 out of 5.0 based on 2 product reviews. I can not get an owners manual for my motor, it is an 2015 Evinrude e-tec , 2 stroke 25 hp
Thank you very much for having this service of free downloads of ETEC manuals.