X OPERATION
Turn the key switch fully clockwise to the After Engine Starts
START position. Crank the engine no longer
than 20 seconds.
Check the water pump indicator. A steady
stream of water indicates the water pump is
working. If a steady stream of water from the
water pump indicator is not visible, stop the
engine. Refer to Engine Overheating on
page 41.
007015
IMPORTANT: The starter motor can be dam-
aged if operated continuously for more than
20
Upon start-up, release the key.
seconds.
007016
If the engine did not start, release the key mo-
mentarily, then try again.
ENGINE STOPPING
Each time the key switch is turned from OFF
to ON, the warning system will self-test. Refer
to Engine Monitoring on page 38. If the
warning system fails to self-test during start-
up, see your Dealer.
Move control handle to NEUTRAL.
Turn key switch counterclockwise to the OFF
position. Remove the key when the boat will
be unattended.
If your outboard does not react normally to
this starting procedure or if it fails to start, re-
fer to Troubleshooting on page 55.
Continue to “Shifting and Speed Control -
Remote Models” on page 28
25
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 25 hp, Evinrude 30 hp, Evinrude PL, Evinrude RL, Evinrude TE, Evinrude TEL |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Marine readers have rated 2009 Evinrude 25 30 hp E-TEC RL TE TEL PL Outboard Boat Owners Manual 4.0 out of 5.0 based on 2 product reviews. I can not get an owners manual for my motor, it is an 2015 Evinrude e-tec , 2 stroke 25 hp
Thank you very much for having this service of free downloads of ETEC manuals.