Maintenance: Electrical system
Electrical system
WARNING! Always stop the engine and break the current using the main switches before working on the
electrical system. Isolate shore current to the engine block heater, battery charger, or accessories mounted
on the engine.
Main switch
The main switch must never be turned off before the
engine has stopped. If the circuit between the genera-
tor and the battery is cut off when the engine is
running the generator can be seriously damaged. For
the same reason charging circuits must never be
switched over while the engine is running.
IMPORTANT! Never break the circuit with the
main switches while the engine is running.
Electrical connections
Also check that all electrical connections are dry and
free of oxidation and that there are no loose connec-
tions. If necessary, spray these connections with a
water-repellent spray (Volvo Penta Universal oil).
Fuses.
The engine is fitted with an automatic fuse. The fuse
protects the system and cuts power in the event of an
overload.
If it is not possible to start the engine or if the instru-
ment stops working while running, the fuse may have
been activated. Reset by pressing in the automatic
fuse.
IMPORTANT! Always investigate the cause of
theoverload!
41
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta D1-13, Volvo Penta D1-20, Volvo Penta D1-30, Volvo Penta D2-40 |
| Model Year | 2005, 2006, 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)