PROPELLER
Continue to tighten propeller nut until nut slots and
cotter pin hole are aligned. Install new cotter pin
and bend ends to secure.
WARNING
When servicing the propeller, twist and
remove all spark plug leads so the engine
cannot be started accidentally.
IMPORTANT: Apply Triple-Guard grease to the en-
tire propeller shaft before installing the propeller. At
least annually, remove the propeller and check for
debris. Clean the shaft and regrease it before rein-
stalling a propeller.
Installation
Slide thrust washer onto shaft with shoulder facing
aft.
Slide propeller onto shaft, engaging the splines and
seating it on the thrust washer.
1.
2.
3.
4.
Thrust washer
Spacer
Propeller nut
Cotter pin
Slide spacer onto the shaft and engage the propel-
ler shaft splines.
Wedge a block of wood between the propeller
blade and the antiventilation plate.
Remove block of wood. Make sure engine is in
NEUTRAL; give propeller a spin. It must turn freely.
Repair
If your propeller hits a solid object, the impact is par-
tially absorbed by the rubber bushing in the hub to
help prevent damage to the engine. A strong impact
can damage the hub and propeller blades. Damage
to blades can cause unusual and excessive vibra-
tion. Damage to the hub can cause excessive en-
gine RPM with little forward movement.
IMPORTANT: Avoid or limit operation using a dam-
aged propeller. Carry a spare propeller.
Keep your propeller in good condition. Use a file to
smooth slight damage to blade edges. See your
DEALER for repair of serious damage.
Install propeller nut and tighten to a torque of 120 in.
lbs. (14 Nยทm).
36
- Maintenance
| Categories | Brands / Company Guides, BRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 55 hp, Johnson WPL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)