ADJUSTMENTS
Idle Speed
Throttle Friction
Adjust until a slight drag is felt when accelerating or
decelerating only. DO NOT overtighten.
The idle speed adjusting knob is located at the end
of the steering handle. Before turning the knob, be
sure the throttle is at SLOW and the motor has
reached normal operating temperature:
•
•
Increase idle speed – turn knob clockwise
Decrease idle speed – turn knob counterclock-
wise
1
1.
Throttle friction screw
Tilt Friction
1
Adjust only enough to control return of gearcase
from tilt to normal operation position.
1.
Idle speed adjusting knob
If your engine displays poor running quality at idle,
ask your DEALER to perform the necessary adjust-
ments.
Carburetor
1
High speed fuel calibration is maintained by the
fixed high speed jet in the carburetor. Fixed jets are
not adjustable.
Low speed fuel calibration is set at the factory with
a range of adjustment provided. If your engine dis-
plays poor running quality at low speed or idle, ask
your DEALER to perform the necessary adjust-
ments.
1.
Tilt friction nut
IMPORTANT: DO NOT overtighten. Doing so in-
creases the pressure required to tilt the motor when
an obstruction is hit. Failure of the motor to tilt upon
impact can result in serious damage.
30
- Maintenance
| Categories | Brands / Company Guides, BRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 55 hp, Johnson WPL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)