General information
Certified engines
About the workshop manual
The manufacturer guarantees that certified new and
currently operational engines meet national and re-
gional environmental regulations (in Lake Constance
for example). The product must be the same as the
example approved for certification purposes. So that
Volvo Penta, as a manufacturer, can guarantee that
currently operational engines meet environmental
regulations, the following service and replacement
part requirements must be observed:
This workshop manual contains technical specifica-
tion, descriptions and instructions for repairing the
standard versions of the following engines
TAMD31M, TAMD31L, TAMD31P, AD31L, AD31P,
KAD32P, TAMD41H, TAMD41M, TAMD41P, AD41P,
TAMD42WJ, KAMD42A, KAMD42B, KAMD42P,
KAD42A, KAD42B, KAD42P, KAMD43P, KAD43P,
KAMD44P, KAD44P. The workshop manual displays
the operations carried out on any of the engines
above. As a result the illustrations and pictures in the
manual that show certain parts on the engines, do
not in some cases apply to all the engines listed
above. However the repair and service operations
described are the same in all essential details.
Where they are not the same this is stated in the
manual and where the difference is considerable the
operations are described separately. Engine
•
•
•
The Service Intervals and maintenance operations
recommended by Volvo Penta must be observed.
Only Volvo Penta genuine replacement parts, in-
tended for the certificated engine, may be used.
The servicing of ignition, timing and fuel injection
systems (gasoline) or injector pumps, pump set-
tings and injectors (diesel) must always be carried
out be an authorized Volvo Penta workshop.
designations and numbers are given on the number
plate (See Workshop manual Group 21 Engine page
15). The engine designation and number should be
given in all correspondence about the engine.
•
•
The engine must not be modified in any way apart
from with accessories and service kits developed
for it by Volvo Penta.
This Workshop Manual has been developed primarily
for Volvo Penta service workshops and qualified per-
sonnel. Persons using this book are assumed to
have a grounding in marine drive systems and be
able to carry out related mechanical and electrical
work.
No modifications to the exhaust pipes and air
supply ducts for the engine room (ventilation
ducts) may be undertaken as this may effect ex-
haust emissions.
Volvo Penta is continuously developing their prod-
ucts. We therefore reserve the right to make chang-
es. All the information contained in this book is based
on product data available at the time of going to print.
Any essential changes or modifications introduced
into production or updated or revised service
•
Seals may only be broken by authorized person-
nel.
IMPORTANT! Use only Volvo Penta Genuine
Parts.
Use of non-original AB Volvo Penta spare
parts will result in AB Volvo Penta being un-
able to assume liability for the engine meet-
ing engine certification requirements.
Any type of damage resulting from the use of
non-original Volvo Penta replacement parts for
the product will not be covered under any war-
ranty provided by AB Volvo Penta.
methods introduced after the date of publication will
be provided in the form of Service Bulletins.
Replacement parts
Replacement parts for electrical and fuel systems are
subject to statutory requirements (US Coast Guard
Safety Regulations for example). Volvo Penta Genu-
ine parts meet these requirements. Any type of dam-
age which results from the use of non-original Volvo
Penta replacement parts for the product will not be
covered under any warranty provided by Volvo
Penta.
5
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta MD6A, Volvo Penta MD7A |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 4)
Marine readers have rated Volvo Penta MD6A MD7A Workshop Manual 3.5 out of 4.0 based on 2 product reviews. good manual just what I needed
Well i haven't read it yet but it's gonna help me out when I do.